BaSO4/纤维素复合纤维的结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Structure and Properties of BaSO4/Cellulose Composite Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用Lyocell 工艺制备了BaSO4/纤维素复合纤维,并分析了硫酸钡(BaSO4)含量对复合纤维的结构与性能的影响。扫描电镜结果表明,随着BaSO4含量的增加,复合纤维表面逐渐变得粗糙,容易形成空洞和缺陷。从X射线衍射结果中可以发现,纤维的结晶度随BaSO4含量的增加而降低。当BaSO4含量小于10%(质量分数,下同)时,复合纤维的断裂强度和初始模量随BaSO4含量的增加略有上升,此后,随BaSO4含量的增加,复合纤维的断裂强度和初始模量均不断下降,断裂伸长率减小。当BaSO4含量达到50%时,复合纤维具有很好的显影效果。

    Abstract:

    The BaSO4/cellulose composite fibers were prepared using Lyocell process, and the influences of BaSO4 content on structure and properties of the fibers were investigated. The results of SEM show that the surface of the fiber is more and more rough with the increase of content of BaSO4. The results of XRD show that the crystallinity of composite fiber decreases with increasing content of BaSO4. When the BaSO4 mass fraction is less than 10%, the breaking strength and initial modulus of composite fibers increase slightly, however, further increasing the content of BaSO4, the breaking strength, initial modulus and elongation at break of composite fibers decrease. The composite fiber with over 50% of BaSO4 content has very good developing effect.

    参考文献
    相似文献
    引证文献
引用本文

杨革生, 齐家乐, 张慧慧, 孟勇伟, 邵惠丽. BaSO4/纤维素复合纤维的结构与性能[J].高分子材料科学与工程,2015,31(9):58-62. Gesheng Yang, Jiale Qi, Huihui Zhang, Yongwei Meng, Huili Shao. Structure and Properties of BaSO4/Cellulose Composite Fiber[J]. Polymer Materials Science & Engineering,2015,31(9):58-62.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-09-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司