Abstract:Quaternized chitosan (QCS), acrylamide (AM) and Gemini-type cationic surface-active agent (maleic alkylene group diethyl bis [octyl dimethyl chloro/bromide], abbreviated as G8-2-8) were used as raw material, and the block copolymers was prepared using potassium persulfate (KPS) as initiator with acrylamide (AM) and Gemini-type cationic surface-active agent. The full interpenetrating network anionic exchange membrane was prepared using glutaraldehyde (GA) as crosslinkers with quaternized chitosan and block copolymers. The experimental results show that the anion exchange membrane has high mechanical properties and anionic conductivity. In addition, the properties of the anion exchange membrane including ion exchange capacity, water uptake, elongation at break, anionic conductivity are increased and tensile strength is decreased with the increases of G8-2-8 amount in the membranes. The optimum anionic conductivity is up to 6.56×10-2 S/cm, which is obtained at 70 ℃ and the mass fraction of G8-2-8 20%. Meanwhile, the SEM shows that the surface of membrane is dense homogeneous, no significant phase separation. TGA shows that the membrane has good thermal stability; the initiate decomposition temperature is higher than 200 ℃.