热处理对不同相对分子质量iPP挤出拉伸薄膜结晶行为的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(11172272, 11372284);高等学校博士学科点专项科研基金项目(20104101110002);河南省自然科学基础研究项目(122300410278)


Effect of Heat Treatment on Crystallization Behaviors of Extruded iPP Stretching Films with Different Molecular Weight
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选用了3种不同相对分子质量及其分布的等规聚丙烯(iPP),使用Hakke挤出机制备iPP薄膜,然后在140 ℃,3%的小应变条件下对薄膜退火处理10 min。利用广角X射线衍射、差示扫描量热仪和红外光谱衍射仪研究了小应变退火对不同相对分子质量iPP薄膜结晶行为和取向结构的影响。实验结果表明,小应变退火后3种相对分子质量样品的结晶度均有提高,用WAXD测试的结果分别由未退火前的59.53,60.40,66.48提高到68.48,68.56,68.74。晶相和非晶相的取向度相比未退火前也均有所提高。

    Abstract:

    Three kinds of iPPs with different molecular weight and molecular weight distribution were selected and were extruded by Hakke extruder. The extruded stretching films were further heat-treated with a small strain of 3% at 140 ℃ for 10 min. Wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR) were used to detect the effects of annealing under the small strain on iPP crystallization behavior and the crystal structure orientation. The tested WAXD results reveal that the annealing at a lower strain level could improve the crystallinity of three molecular weight samples from 59.53, 60.40, 66.48 to 68.48, 68.56, 68.74, respectively, and the orientations of both crystallized and amorphous phases are also increased compared to that before annealing.

    参考文献
    相似文献
    引证文献
引用本文

张典, 张晓黎, 王冰花, 陈静波, 申长雨.热处理对不同相对分子质量iPP挤出拉伸薄膜结晶行为的影响[J].高分子材料科学与工程,2015,31(9):112-116. Dian Zhang, Xiaoli Zhang, Binghua Wang, Jingbo Chen, Changyu Shen. Effect of Heat Treatment on Crystallization Behaviors of Extruded iPP Stretching Films with Different Molecular Weight[J]. Polymer Materials Science & Engineering,2015,31(9):112-116.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-09-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司