结晶性共聚聚酰亚胺的多重熔融行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(11475267)


Multi-Melting Behaviors of Crystalline Copolyimide
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用差示量热扫描分析、温度调制差示量热扫描分析和常温、变温X射线衍射实验(XRD)对共聚聚酰亚胺3,3′,4,4′-联苯四酸二酐(s-BPDA)/ 1,3,-双(4-氨基苯氧基)苯(TPER)/ 4,4′-二氨基二苯醚(4, 4′-ODA)的多重熔融行为进行了研究,其中n(TPER)∶n(ODA)=8∶2。研究结果表明,该共聚物以低速率从熔体降至室温过程中所产生的双重熔融峰是由于不同厚度晶层的熔融引起的;该共聚物在不同温度熔融恒温结晶后,XRD实验结果显示有新的衍射峰出现;多重熔融峰是由原始晶体熔融-再结晶-再熔融过程、不同晶型的熔融以及不同厚度晶层的熔融这几方面原因共同作用的结果。

    Abstract:

    A semi-crystalline copolyimide based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride (s-BPDA)/ 1,3-bis-(4-aminophenoxy)benzene (TPER)/ 4,4′-oxydianiline (4,4′-ODA)/ phthalic anhydride (PA) was synthesized, and the mole ratio of ODA and TPER is 2:8. This copolyimide exhibits excellent thermal stabilities by TGA and multi-melting behaviors are much evident after the samples are cured under non-isothermal crystallization conditions or isothermal crystallization conditions. Reasons for multi-melting behaviors were therefore studied by DSC, TMDSC and XRD. The copolyimide displays double melting peaks during reheating scans after being cooled from melt at lower rates. DSC and TMDSC results indicate that the melting of crystal layers with different thickness is the reason for double melting peaks. The copolyimide displays a triple-melting behavior after isothermally crystallized at different temperatures and the reasons for this become more complicated. Including the melting- recrystallization-remelting behaviour, new crystal forms and perfectness of the crystals would be the three most important reasons for multi-melting behaviours.

    参考文献
    相似文献
    引证文献
引用本文

王玮, 李天富, 王子军, 刘荣灯, 刘蕴韬, 陈东风.结晶性共聚聚酰亚胺的多重熔融行为[J].高分子材料科学与工程,2015,31(9):127-131. Wei Wang, Tianfu Li, Zijun Wang, Rongdeng Liu, Yuntao Liu, Dongfeng Chen. Multi-Melting Behaviors of Crystalline Copolyimide[J]. Polymer Materials Science & Engineering,2015,31(9):127-131.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-09-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司