纤维素基离子凝胶聚合物电解质的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21304029);高等学校博士点基金(20121301120004);河北省自然科学基金资助项目 (B2013201117);中国博士后科学基金(2014M551040);河北省教育厅优秀青年基金(YQ2014025)


Preparation and Properties of In Situ Crosslinking Cellulose-Based Ionogels
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过原位交联木浆纤维素/1-乙基-3-甲基咪唑醋酸盐溶液制备了纤维素基离子凝胶聚合物电解质,并采用扫描电子显微镜(SEM)、流变、力学拉伸及交流阻抗等测试,研究了纤维素基离子凝胶的形貌﹑力学性能和电化学性能。SEM结果表明,所得交联型离子凝胶具有纳米多孔网状结构。流变结果表明高温下离子凝胶具有很好的弹性,200 ℃时的弹性模量为1.7×105 Pa。电学性能测试结果表明室温下离子凝胶具有很高电导率,达到6.3×10-3 S/cm,且电导率随温度的升高而增大。力学性能测试结果显示离子凝胶具有良好的力学强度,其拉伸强度达9.6 MPa。

    Abstract:

    Cellulose-based ionogels were successfully prepared from the wood pulp cellulose/1-ethyl-3-methylimidazole acetate solution by in situ crosslinking, and their morphology, mechanical, electrochemical properties were investigated via scanning electron microscope (SEM), rheology, tensile tests, and AC impedance. The SEM results indicate that the obtained crosslinked cellulose-based ionogels have nanoporous mesh architecture, which can?absorb large amounts of ionic liquid. The rheological results suggest that the storage modulus of the ionogels can reach 106 Pa at 25 ℃ and 1.7×105 Pa at 200 ℃. Furthermore, the ionogels have good mechanical properties, the tensile strength can reach 9.6 MPa and the elongation at break is 170.2% for 7%-ionogels. The ionic conductivity of the ionogels at ambient temperature is 6.3×10-3 S/cm and it increases with increasing temperature. The above results demonstrate that this novel ionogels are promising for application as gel polymer electrolytes (GPE) in electrochemical area.

    参考文献
    相似文献
    引证文献
引用本文

秦维超, 吕树芳, 赵宁宁, 冯晓瑞, 尹晨欢, 宋洪赞.纤维素基离子凝胶聚合物电解质的制备与性能[J].高分子材料科学与工程,2015,31(9):153-156. Weichao Qin, Shufang Lü, Ningning Zhao, Xiaorui Feng, Chenhuan Yin, Hongzan Song. Preparation and Properties of In Situ Crosslinking Cellulose-Based Ionogels[J]. Polymer Materials Science & Engineering,2015,31(9):153-156.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-09-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司