乳酸原位聚合改性纳米纤维素的制备及应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目( 31270632);中国博士后科学基金一等资助项目(2013M540413)


In Situ Polymerization of Lactic Acid and Application of Modified Nancrystalline Cellulose
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    乳酸原位聚合改性纳米纤维,并和聚乳酸制备复合材料。先由64%硫酸水解微晶纤维素(MCC)制备纳米纤维素(NCC),再乳酸原位聚合接枝纳米纤维素得到改性后纳米纤维素(g-NCC),最后将g-NCC按0%~5%质量比与聚乳酸(PLA)共混,制成复合材料g-NCC/PLA。透射电子显微镜观察得到棒状纳米纤维素长度为100~200 nm,直径为10~25 nm,傅里叶变换红外光谱和核磁共振谱证明乳酸均聚物已接枝到纳米纤维素,复合材料性能分析表明g-NCC与PLA相容性比未改性NCC与PLA相容性好,g-NCC含量为2%时,复合材料拉伸强度可达到45 MPa,比纯PLA提高85%,结晶度提高10%。

    Abstract:

    Composites were prepared from poly(lactic acid) (PLA) and nancrystalline cellulose (NCC) grafted with lactic acid oligomers (g-NCC). NCC was prepared by way of hydrolysis with 64% sulfuric acid from microcrystalline cellulose. The g-NCC/PLA composites were obtained from grafting lactic acid oligomers of NCC and PLA at 0%~5% respectively. It can be observed that the length of NCC is 100~200 nm as well as the diameter is 10~25 nm by TEM. The chemical structure of g-NCC was characterized by FT-IR and NMR methods, which indicate that L-lactic acid oligomers are successfully grafted onto NCC. The results show that g-NCC can improve compatibility with PLA. When the content of g-NCC is 2%, the tensile strength can be achieved to 45 MPa which is 85% higher than that of pure PLA. At the same time, the crystallinity of PLA is increased by 10%.

    参考文献
    相似文献
    引证文献
引用本文

孙永梅, 洪铮铮, 田秀枝, 尹园园, 蒋学, 黄丹, 王树根.乳酸原位聚合改性纳米纤维素的制备及应用[J].高分子材料科学与工程,2015,31(9):157-161. Yongmei Sun, Zhengzheng Hong, Xiuzhi Tian, Yuanyuan Yin, Xue Jiang, Dan Huang, Shugen Wang. In Situ Polymerization of Lactic Acid and Application of Modified Nancrystalline Cellulose[J]. Polymer Materials Science & Engineering,2015,31(9):157-161.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-09-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司