壳聚糖/羟基磷灰石复合微球的原位合成及体外释药性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目 (51303207);江苏省自然科学基金资助项目(BK20130173)


In-Situ Synthesis of Chitosan/Hydroxyapatite Composite Microspheres and Their In Vitro Drug Release Behavior
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用原位合成法在乳液体系中制备了壳聚糖/羟基磷灰石(HA)复合微球,并探讨了实验条件对复合微球制备的影响。结果表明,当壳聚糖/HA质量比为4/1时,可以获得球形规则,分散性好,平均粒径为9 μm的复合微球。此外,NaOH溶液(1 mol/L)的加入量应不少于3 mL;交联剂(1 mL)的最佳加入浓度为 8%;向油相中先加入钙盐比先加入磷酸盐时的成球效果好。以盐酸四环素为模型药物,对复合微球的体外载药和释药性能进行了研究。结果显示,HA的引入大大提高了药物的包封率和载药量,而且使得复合微球比纯壳聚糖微球具有更显著的药物缓释效果。

    Abstract:

    Chitosan/hydroxyapatite (HA) composite microspheres were in-situ synthesized in an emulsion system, and the effects of various experimental parameters on the preparation of the composite microspheres were investigated. The results show that, the composite microspheres prepared at a chitosan/HA mass ratio of 4/1 possess a regular shape, high dispersity and an average diameter of 9 μm. Moreover, the volume of the added NaOH solution (1 mol/L) should be not less than 3 mL; the optimal concentration of the cross-linker (1 mL) is 8%; the calcium salt rather than the phosphate one should be firstly added to the oil phase. Tetracycline hydrochloride was chosen as a model drug to examine in vitro drug loading and release behaviors of the composite microspheres. It is demonstrated that, the addition of HA efficiently increases the drug-loading percentage and drug entrapment efficiency, and also improves the sustained drug delivery behavior of the chitosan microspheres.

    参考文献
    相似文献
    引证文献
引用本文

滕淑华, 丁翠翠, 王鹏.壳聚糖/羟基磷灰石复合微球的原位合成及体外释药性能[J].高分子材料科学与工程,2015,31(10):38-42. Shuhua Teng, Cuicui Ding, Peng Wang. In-Situ Synthesis of Chitosan/Hydroxyapatite Composite Microspheres and Their In Vitro Drug Release Behavior[J]. Polymer Materials Science & Engineering,2015,31(10):38-42.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-10-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司