乙烯-乙烯醇共聚物增强聚乙烯醇膜的结构与机理分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51203124)


Mechanical and Structural Analysis ofPoly(Vinyl Alcohol)/Poly(Ethylene-co-Vinyl Alcohol) Blend Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以乙烯-乙烯醇共聚物(EVOH)作为增强材料,聚乙烯醇(PVA)作为基体,采用干法流延成膜的方法制备出不同质量比的PVA/EVOH复合膜,并研究了该复合膜的结构、性能与增强机理。结果表明,PVA/EVOH复合膜具有较好的相容性,EVOH的加入能够有效减弱PVA分子内与分子间的氢键强度,从而提高了PVA/EVOH复合膜的结晶度和热稳定性。随着EVOH的增加,PVA/EVOH复合膜的拉伸强度、弹性模量和断裂功均呈现先增加后减小的趋势,其中拉伸强度和断裂功可以达到35.36 MPa和0.032 J,比纯PVA膜分别提高了74.4%和540%。

    Abstract:

    To obtain highly improved mechanical properties, poly(ethylene-co-vinyl alcohol) (EVOH) was incorporated into poly(vinyl alcohol) (PVA) films by solution casting method. The surface and cross-section morphologies of all samples were characterized by scanning electron microscopy. FT-IR spectra show that the hydrogen bonds of PVA/EVOH blend films are gradually weakened with the increase of EVOH content. WAXD patterns indicate that the crystallinity of PVA/EVOH blend films is higher than that of pure PVA films, suggesting that the reduction of hydrogen bonds favors the alignment and arrangement of PVA macromolecules. Based on DSC curves, the endothermic peak temperature of PVA/EVOH blend film shifts to higher values, including the onset temperature and the end temperature. Moreover, mechanical properties of PVA/EVOH blend films depend on the content of EVOH. The maximum tensile strength, Young′s modulus and fracture energy of blend films could respectively reach 35.36 MPa, 3.87 N/mm and 0.032 J, which increase by 74.4%, 73.5% and 540% compared with those of pure poly(vinyl alcohol) film.

    参考文献
    相似文献
    引证文献
引用本文

唐运容, 郭蕾, 黄良辉, 刘欣.乙烯-乙烯醇共聚物增强聚乙烯醇膜的结构与机理分析[J].高分子材料科学与工程,2015,31(10):57-61. Yunrong Tang, Lei Guo, Lianghui Huang, Xin Liu. Mechanical and Structural Analysis ofPoly(Vinyl Alcohol)/Poly(Ethylene-co-Vinyl Alcohol) Blend Films[J]. Polymer Materials Science & Engineering,2015,31(10):57-61.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-10-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司