高组分纳米碳酸钙填充聚丙烯及增韧机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(11372108);湖南省自然科学基金资助项目(14JJ5021);湖南省高校创新平台开放基金资助项目(14K032,13K098);湖南省研究生科研创新项目(CX2015B561)


Toughening Mechanism of Polypropylene with High Components of Nano-Calcium Carbonate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用工业级的纳米碳酸钙(nano-CaCO3),通过双螺杆挤出机制备了一系列nano-CaCO3填充的聚丙烯(PP)复合材料。力学性能实验表明,高组分nano-CaCO3填充PP复合材料的拉伸强度略有下降,而弯曲模量有较大提高;nano-CaCO3在低组分时对PP没有明显的增韧效果,但在20~40 phr时对PP都有较好的增韧效果。当填充40 phr时,其CHARPY冲击强度达到17.0 kJ/m2。通过偏光显微镜(POM)、差示扫描量热仪(DSC)、X射线衍射仪(XRD) 、扫描电子显微镜(SEM)等研究了高含量nano-CaCO3对复合材料结晶的影响。POM观察表明nano-CaCO3使PP的球晶尺寸变小;DSC和XRD研究表明复合材料从单纯的α晶型向α和β晶型共同存在转变,并且结晶峰温升高了约7.0 ℃(8#样),结晶度增加到62.7%;SEM观察表明PP/高组分nano-CaCO3复合材料内仅有少量的银纹-剪切带和刚性粒子脱粘。但有大量120~300 nm的孔洞,估计原因是较蓬松的纳米碳酸钙粒子之间含有大量的微小气体,在加工剪切后保留于复合材料内,形成一种带亚微米级孔洞的复合材料。这些孔洞最有可能是导致材料韧性大幅度上升的主要原因。

    Abstract:

    PP/nano-calcium carbonate (nano-CaCO3) composites filled with industrial nano-CaCO3 were prepared by a twin-screw extruder at filler loadings of a series of copies. The mechanical properties, thermal behaviors and morphology structure of PP/nano-CaCO3 composites were investigated to explore toughening mechanism. The mechanical tests results show that the tensile strength of high components of PP/nano-CaCO3 composites decreases slightly, while the flexural modulus is improved greatly. What is more, it has a toughening effect on PP when the content of nano-CaCO3 is 20~40 phr. And the CHARPY impact strength is 17.0 kJ/m2 at a 40 phr filled content. Polarized light microscopy (POM) measurement indicates that the spherulite size of the materials becomes smaller because of nano-CaCO3. DSC studies reveal that crystallization peak temperature of composites increase about 7.0 ℃ (8# sample), DSC and XRD results show that α crystal form of PP transforms into both α and β co-crystal form. SEM observations show that only small amount of silver streaks-cut tape and rigid particles debonding exist in the PP/nano-CaCO3 composites. And a large number of sub-micron holes which are about 120~300 nm size are found in PP matrix, and these holes are probably originated from huge mount of gases which exist in fluffy nano-CaCO3 particles, after processing the gases preserved in the PP matrix, they form composite material with sub-micron holes. These sub-micron holes are most likely to be the main cause of a substantial increase in material toughness.

    参考文献
    相似文献
    引证文献
引用本文

石璞, 陈浪, 钟苗苗, 刘跃军.高组分纳米碳酸钙填充聚丙烯及增韧机理[J].高分子材料科学与工程,2015,31(10):69-74. Pu Shi, Lang Chen, Miaomiao Zhong, Yuejun Liu. Toughening Mechanism of Polypropylene with High Components of Nano-Calcium Carbonate[J]. Polymer Materials Science & Engineering,2015,31(10):69-74.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-10-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司