聚丙烯/有机蒙脱土复合材料的发泡行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21264004);贵州省科技厅重大专项(2012-6023)


Foaming Behavior of Polypropylene/Organic Montmorillonite Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用型腔体积可控注塑发泡装置制备不同体积膨胀率的聚丙烯和聚丙烯/有机蒙脱土(PP/OMMT)复合材料发泡试样,探究了不同体积膨胀率下聚丙烯发泡行为。结果表明,在较高的体积膨胀率下,泡孔结构趋于恶化,而有机蒙脱土的引入提高了聚丙烯粘弹响应和降温结晶速率,起到了抑制泡孔结构恶化的作用。在泡孔生长动力学研究的基础上,将泡孔生长过程分为2个阶段,快速生长阶段和慢速生长应力松弛阶段,分析了聚合物粘弹性对泡孔生长、稳定过程的影响。

    Abstract:

    Foamed polypropylene and polypropylene / organic montmorillonite (PP/OMMT) composites samples were prepared with different volume expansion ratio by a injection molding machine equipped with volume-adjustable cavity, and the foaming behavior was investigated. It is found that the cell structure is deteriorated in high volume expansion ratio, however the introduction of OMMT improves the rheological property and crystallization rate of polymer melt, and the cell structure deterioration is suppressed. In addition, based on the previous studies of bubbles growth kinetics, the cell growth process is divided into rapid growth stage and cell wall stress relaxation stage to analyze the effect of polymer viscoelasticity on the cell growth and stabilization.

    参考文献
    相似文献
    引证文献
引用本文

郝明洋, 段焕德, 张纯, 龚维, 何力.聚丙烯/有机蒙脱土复合材料的发泡行为[J].高分子材料科学与工程,2015,31(10):81-86. Mingyang Hao, Huande Duan, Chun Zhang, Wei Gong, Li He. Foaming Behavior of Polypropylene/Organic Montmorillonite Composites[J]. Polymer Materials Science & Engineering,2015,31(10):81-86.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-10-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司