长玻纤增强聚合物注塑充填行为和纤维取向模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江西省自然科学基金资助项目(20142BAB20603);江西省教育厅科技项目(GJJ14715);博士启动金(09005198)


3D Simulation of Filling Behavior and Fiber Orientation for Long Glass Fiber Reinforced Polymer Composites During Injection Molding Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    与短纤维增强聚合物复合材料相比,长纤维增强聚合物复合材料具有良好的性能,但影响其注塑制品性能的工艺因素较多且复杂。文中以GB/T1447-2005标准拉伸试样为例,采用3D模拟技术对长纤维增强聚合物复合材料的注塑成型充填过程进行模拟,并采用各项异性旋转扩散-诱导应变闭合模型对长纤维的纤维取向进行数值分析,研究结果表明:(1)3D模拟技术能有效表征长纤维增强聚合物复合材料注塑成型的充填流动过程;(2)拉伸试样中纤维取向分布呈现明显的表层-芯层-表层的结构,且表层区域的纤维取向程度明显高于芯层纤维的取向。

    Abstract:

    Compared with short fiber reinforced polymer composites, long fiber reinforced polymer composites (LFRPc) have good performance. However, there are some process factors which can influence properties of the parts and have complex relationship. Taken the tensile sample in GB/T1447-2005 as example, by 3D simulation technology, filling behavior of LFRPc during injection molding was simulated and based on Anisotropic Rotary Diffusion Reduced Strain Closure model fiber orientation of LFRPc was analyzed. The results show that: (1) 3D simulation technology can effectively characterize filling behavior of LFRPc during injection molding; (2) fiber orientation distribution presents skin-core-skin structure characters, and the degree of fiber orientation in the regions of skin layers is better than that of core layers.

    参考文献
    相似文献
    引证文献
引用本文

熊爱华, 柳和生, 黄益宾, 余忠, 章凯, 蔡金平.长玻纤增强聚合物注塑充填行为和纤维取向模拟[J].高分子材料科学与工程,2015,31(10):110-114. Aihua Xiong, Hesheng Liu, Yibin Huang, Zhong Yu, Kai Zhang, Jinping Cai.3D Simulation of Filling Behavior and Fiber Orientation for Long Glass Fiber Reinforced Polymer Composites During Injection Molding Process[J]. Polymer Materials Science & Engineering,2015,31(10):110-114.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-10-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司