聚(吡啶-酰亚胺)无胶覆铜板的制备和性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51373164)


Preparation and Properties of Polyimdie Copper Clad Laminates Containing Diphenylpyridine
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以联苯二酐(BPDA)和不同比例的2,5-二氨苯基吡啶(PRD)及二苯醚二胺(ODA)为单体,通过共聚的方法,制备了一系列聚酰胺酸(PPA);将其涂布于铜箔表面,高温热亚胺化后获得双层柔性覆铜板。研究了刚性二胺PRD和柔性二胺ODA的比例对聚酰亚胺薄膜热膨胀系数、双层覆铜板的尺寸稳定性以及薄膜与铜箔的粘接强度的影响,分析了含吡啶聚酰亚胺与铜箔的粘接机理。结果表明,当PRD/ODA的摩尔比为1∶1时,聚酰亚胺的热膨胀系数与铜箔相当,可与铜箔构成尺寸稳定的无胶挠性覆铜板;其与铜箔的粘接强度达到19.7 N /cm。这种含吡啶聚酰亚胺的性能可以满足无胶挠性印制电路对基底膜材料的尺寸稳定性和粘接性能的要求。

    Abstract:

    A series of poly(amic acid)s(PAAs) containing diphenylpyridine were synthesized from the reaction of 3,3′,4,4′-biphenyl tetracarboxylic dianhydride with 4,4-oxydianiline(ODA) and 2,5-bis(4-aminophenyl)pyridine (PRD), followed by coating these PAAs solutions onto copper foils and then imidizing thermally. The dimensional stability and peel strength of the resulting two-layer flexible copper-clad laminates were characterized. It is found that when the mole ratio of PRD to ODA is 1∶1, the coefficient of thermal expansion (CTE) values of the polyimide (PI) is close to the value of the copper foil, and the 90°-peel strength of the laminate reaches the maximum value of 19.7 N/cm. Hence, the physical properties of polyimide containing PRD could match simultaneously requirement of curl-free polyimide/copper laminate in dimensional stability and adhesion properties.

    参考文献
    相似文献
    引证文献
引用本文

姚海波, 金日哲, 康传清, 郭海泉, 邱雪鹏, 高连勋.聚(吡啶-酰亚胺)无胶覆铜板的制备和性能[J].高分子材料科学与工程,2015,31(10):115-119. Haibo Yao, Rizhe Jin, Chuanqing Kang, Haiquan Guo, Xuepeng Qiu, Lianxun Gao. Preparation and Properties of Polyimdie Copper Clad Laminates Containing Diphenylpyridine[J]. Polymer Materials Science & Engineering,2015,31(10):115-119.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-10-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司