基于热可逆Diels-Alder反应的聚氨酯热熔胶的合成与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Performance of Hot Melt Polyurethane Adhesives Based on Diels-Alder Reaction
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过N,N′-羰基二咪唑(CDI)直接将聚己二酸丁二醇酯(PBA-1000)与糠胺(FA)相连制备得到呋喃环封端的聚氨酯预聚物(PCF),之后以双马来酰亚胺(BMI)为扩链剂通过DA反应制备出一种新型的含DA键的聚氨酯热熔胶(DA-PU)。利用核磁共振氢谱、衰减全反射傅里叶变换红外光谱、差示扫描量热分析、热重分析等测试对样品的结构和热可逆性能进行了表征,表明其具备优异的热可逆性能。流变测试表明样品的黏度随着温度的升高急剧下降,随着温度的降低又会急剧上升,并且此过程可以多次循环。粘接测试表明,DA-PU样品对于不锈钢基材的剪切粘接强度达到5.36 MPa,并且重复粘接的强度可以达到6.14 MPa和5.74 MPa,具备优异的粘接性能。

    Abstract:

    A new kind of hot melt polyurethane adhesive (HMPA) contained Diels-Alder (DA) bonds was synthesized from a furan-terminated prepolymer (PCF) and a commercial bismaleimide (BMI). The PCF was obtained from PBA-1000 and furfurly amine (FA) through reacting with N,N′-carbonyldiimidazole(CDI). The structure of PCF and DA-PU was characterized by 1H-NMR, ATR-FTIR and TGA. It also indicates the good thermal reversibility of DA-PU. The rheology test shows that the viscosity of DA-PU depends on the temperature. When temperature rises up, the viscosity goes down; when temperature goes down, the viscosity rises up and this procedure can be repeated at least three times. In the shear adhesive strength test, to the substrate of stainless steel, the strength is 5.36 MPa; after repeating once and twice, the strength is 6.14 MPa and 5.74 MPa respectively, which indicate good shear adhesive strength of DA-PU.

    参考文献
    相似文献
    引证文献
引用本文

伍梅银, 杜鹏飞, 郑震, 王新灵.基于热可逆Diels-Alder反应的聚氨酯热熔胶的合成与性能[J].高分子材料科学与工程,2015,31(11):1-5. Meiyin Wu, Pengfei Du, Zhen Zheng, Xinling Wang. Synthesis and Performance of Hot Melt Polyurethane Adhesives Based on Diels-Alder Reaction[J]. Polymer Materials Science & Engineering,2015,31(11):1-5.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司