通过高温自由基聚合合成耐热聚甲基丙烯酸甲酯树脂
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国石油科技创新基金(2013D-5006-0502);吉林省青年科研基金(20130522140JH);国家自然科学基金资助项目(51273026)


Synthesis of Heat-Resistant Polymethyl Methacrylate Resin by High-Temperature Radical Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文探究了采用乙醇作溶剂,通过高温自由基聚合方法合成耐热甲基丙烯酸甲酯(MMA)与甲基丙烯酰胺(MAAM)共聚物的可行性,研究了聚合温度对Poly(MMA-co-MAAM)共聚物的共聚组成、相对分子质量、相对分子质量分布及共聚物耐热性的影响。结果表明,用乙醇作溶剂,聚合温度在90~120 ℃范围内可以成功合成高耐热Poly(MMA-co-MAAM)共聚物,其最佳共聚合温度为110 ℃。在此温度条件下合成的Poly(MMA-co-MAAM)共聚物的相对分子质量分布指数均小于1.5,耐热性最佳,其玻璃化转变温度较同等聚合条件下合成的PMMA均聚物高46 ℃。

    Abstract:

    The feasibility of preparing poly(methyl methacrylate-co-methacrylamide) (Poly(MMA-co-MAAM)) copolymer by the high-temperature solution polymerization with ethanol as solvent was tried in this work. The effect of polymerization temperature on the copolymerization composition, molecular weight and its distribution of Poly(MMA-co-MAAM) copolymer, and its heat resistance were investigated. It is shown that the method of synthesizing Poly(MMA-co-MAAM) copolymer by the high temperature solution polymerization with ethanol as solvent at the polymerization temperature range of 90 ℃ to 120 ℃ is very feasible; the optimum reaction temperature of copolymerization of MMA and MAAM is 110 ℃. Under the above condition, the synthesized Poly(MMA-co-MAAM) copolymer has a narrow molecular distribution (d<1.5) and the better heat resistance, its glass transition temperature is 46 ℃ higher than that of PMMA homopolymer.

    参考文献
    相似文献
    引证文献
引用本文

刘捷, 曹春雷, 高天正, 于涛, 赵爽, 张会轩.通过高温自由基聚合合成耐热聚甲基丙烯酸甲酯树脂[J].高分子材料科学与工程,2015,31(11):40-43. Jie Liu, Chunlei Cao, Tianzheng Gao, Tao Yu, Shuang Zhao, Huixuan Zhang. Synthesis of Heat-Resistant Polymethyl Methacrylate Resin by High-Temperature Radical Polymerization[J]. Polymer Materials Science & Engineering,2015,31(11):40-43.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司