双端乙烯基聚硅氧烷改性聚丙烯酸酯胶膜的性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Properties of Polyacrylate Modified with α,ω-Bis(Vinyl)Polydimethylsiloxane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用自制双端乙烯基聚二甲基硅氧烷(diVi-PDMS)改性聚丙烯酸酯,并应用于涂料印花。研究了diVi-PDMS的相对分子质量对改性聚丙烯酸酯胶膜的交联度、耐水性、力学性能的影响,并测试了印花性能。X射线光电子能谱分析、扫描电镜分析表明Si元素易于胶膜表面富集;经研究发现,随着diVi-PDMS相对分子质量的增大,胶膜的交联度变小;胶膜水接触角先增后降,胶膜吸水率先降后增;胶膜断裂强度增大,断裂延伸率降低,断裂功先增后减。当diVi-PDMS的相对分子质量约为2051时,改性胶膜耐水性强,断裂功高,印花织物耐干、湿摩擦色牢度达4级,手感柔软。适量相对分子质量diVi-PDMS改性,能提高胶膜耐水性和力学性能,使涂料印花织物具有良好的耐摩擦牢度和柔软手感。

    Abstract:

    The polyacrylate was modified with α,ω-bis(vinyl)polydimethylsiloxane (diVi-PDMS) via miniemulsion polymerization, and used for pigment printing. The influences of relative molecular mass of diVi-PDMS on crosslinking degree, water-resistance, mechanical properties of modified polyacrylate film were studied and the performances of pigment printing were measured. XPS and SEM indicate that polydimethylsiloxane(PDMS) segment enrich on the surface of film easily. With increasing of relative molecular mass of diVi-PDMS, the crosslinking degree of modified film decreases, the water contact angle of modified film increases at first and decreases at last, the water absorption decreases at first and increases at last, the breaking strength of modified film increases, the breaking elongation decreases, the work of breaking increases at first and decreases at last. When the relative molecular weight of diVi-PDMS is about 2051, the hydrophobicity of modified film is strong and the work of breaking is large, the colour fastness to dry and wet rubbing of printed fabric could achieve grade 4 and the handle is soft. In summary, being modified with diVi-PDMS of appropriate relative molecular mass, the film could get good water resistance and mechanical properties; the printed fabric has good rubbing fastness and soft handle.

    参考文献
    相似文献
    引证文献
引用本文

陈权胜, 吴明华, 张奇鹏, 董昭.双端乙烯基聚硅氧烷改性聚丙烯酸酯胶膜的性能[J].高分子材料科学与工程,2015,31(11):80-85. Quansheng Chen, Minghua Wu, Qipeng Zhang, Zhao Dong. Properties of Polyacrylate Modified with α,ω-Bis(Vinyl)Polydimethylsiloxane[J]. Polymer Materials Science & Engineering,2015,31(11):80-85.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司