阻燃抑烟水性聚氨酯的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

安徽建筑大学博士基金(2014年);“十二五”国家科技支撑计划(2013BAJ01B05)


Preparation and Properties of Flame Retardancy and Smoke Suppression Waterborne Polyurethanes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚酯二元醇、甲苯二异氰酸酯(TDI)、γ-氨丙基三乙氧基硅烷(KH-550)、硼酸等为原料合成了一系列含硅、含硼的水性聚氨酯。利用红外光谱仪、激光粒度分析仪、接触角测量仪、锥形量热仪、烟密度测试仪等对合成的水性聚氨酯进行结构表征和性能测试。结果表明,硅氧烷被成功地引入到水性聚氨酯链段中;改性后的水性聚氨酯乳液粒径有增大的趋势,但乳液的稳定性没有明显的变化。与普通的水性聚氨酯膜相比,经过硅、硼改性的水性聚氨酯膜与水的接触角由51.0°增大到98.8°,具有一定的疏水性;最大热释放速率和总热释放量分别由408.6 kW/m2和13.8 MJ/m2降低到246.3 kW/m2和7.2 MJ/m2,烟密度由272.0降低到161.3,具有较好的阻燃、抑烟性能;另外,断裂强度也有所提高。

    Abstract:

    A series of silicon, boron-modified waterborne polyurethanes(WPUs)were synthesized with polyester diol, toluene diisocyanate (TDI), γ-aminopropyltriethoxysilane (KH-550) and boric acid. The structure and performance of waterborne polyurethanes were characterized by FT-IR, laser particle size analyzer, surface contact angle measurement, cone calorimeter and smoke density chamber. The results show that siloxane is successfully introduced into the waterborne polyurethane chain segment; the modified waterborne polyurethane has increasing particle size with similar stability. Compared with ordinary waterborne polyurethane film, the contact angle of the modified waterborne polyurethane increases from 51.0° to 98.8°, indicating a degree of hydrophobicity. The peak heat release rate and total heat release of the modified waterborne polyurethane decrease from 408.6 kW/m2 to 246.3 kW/m2 and from 13.8 MJ/m2 to 7.2 MJ/m2, respectively. The smoke density decreases from 272.0 to 161.3, which indicates good fire-retardant and smoke suppressing performance. The tensile strength is also improved.

    参考文献
    相似文献
    引证文献
引用本文

徐文总, 聂祝婷, 张丙亮, 李冲冲.阻燃抑烟水性聚氨酯的制备与性能[J].高分子材料科学与工程,2015,31(11):161-166. Wenzong Xu, Zhuting Nie, Bingliang Zhang, Chongchong Li. Preparation and Properties of Flame Retardancy and Smoke Suppression Waterborne Polyurethanes[J]. Polymer Materials Science & Engineering,2015,31(11):161-166.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司