偶联改性富勒烯对氢氧化铝填充聚乙烯阻燃性能和热稳定性的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073140)


Effects of Coupling Modified Fullerene on the Flame Retardancy and Thermal Stability of Aluminum Hydroxide Filled Polyethylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以硅烷偶联剂KH-550为表面改性剂处理富勒烯(C60)和氢氧化铝(ATH),研究改性C60对HDPE/ATH复合材料阻燃性能和热稳定性的影响。在高密度聚乙烯(HDPE)中单纯加入ATH需要160 phr才能使UL-94垂直燃烧等级达到V-0级别,而加入1 phr C60后,ATH只需要120 phr即可达到V-0级,同时,改性C60的加入可以有效延长材料的点燃时间、最大热释放速率对应的时间和氧化诱导期,降低最大热释放速率。这一结果表明,少量偶联改性富勒烯有助于大幅度降低阻燃剂ATH的用量,减少由此带来的对材料力学性能和加工性能的不良影响。

    Abstract:

    Fullerene (C60) and aluminum hydroxide (ATH) were treated with silane coupling agent KH-550. The influences of modified C60 on the flame retardancy and thermal stability of HDPE/ATH composites were studied. 160 phr of ATH is needed to make UL-94 vertical flame rating of HDPE to V-0 level, but after adding 1 phr C60, only 120 phr ATH is needed. Besides, adding C60 extends the time to ignition, time to peak heat release rate and oxidation induction time, while cut down the peak heat release rate. It will help to cuts down the amount of flame retardant ATH significantly, thus reduce adverse effects of the resulting mechanical properties and processing properties.

    参考文献
    相似文献
    引证文献
引用本文

韩黎刚, 郭正虹, 方征平.偶联改性富勒烯对氢氧化铝填充聚乙烯阻燃性能和热稳定性的影响[J].高分子材料科学与工程,2015,31(12):54-56. Ligang Han, Zhenghong Guo, Zhengping Fang. Effects of Coupling Modified Fullerene on the Flame Retardancy and Thermal Stability of Aluminum Hydroxide Filled Polyethylene[J]. Polymer Materials Science & Engineering,2015,31(12):54-56.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司