电石渣增强改性聚氯乙烯塑料
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广州市科技重大专项项目(2013Y2-00110)


Properties of Polyvinyl Chloride Based on Carbide Slag
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过扫描电镜、X射线衍射和粒径分析等对电石法生产聚氯乙烯(PVC)过程中产生的废渣——电石渣进行理化性质表征,结果表明电石渣主要成分是氢氧化钙,且含有少量的镁铁化合物,其中粒径为8 μm,是一种粒径分布较宽的工业废渣。采用偶联剂对电石渣进行改性并将其作为填料应用到硬质PVC塑料中,研究了偶联剂种类及用量、改性电石渣用量对PVC塑料性能的影响。研究表明,电石渣填充PVC塑料的各项性能与重质碳酸钙填充效果相近,偶联剂KH570改性电石渣效果最好,当KH570用量为填料的2%时,20 phr改性电石渣填充PVC塑料力学性能最优;热重分析显示随着改性电石渣的加入,PVC塑料的热稳定性能得到大幅提升

    Abstract:

    Basic properties of carbide slag were characterized by SEM, XRD and particle analysis. The results reveal that the main component of carbide slag is calcium hydroxide with a small amount of oxides of iron and magnesium. With a median diameter of about 8 μm, it consists of different size of particles and has broad size distribution. The effects on properties of PVC filled with carbide slag were investigated and the results show that the carbide slag has almost the same reinforcing effects as the heavy calcium carbonate. Moreover, several coupling agents were used to modify carbide slag. The results demonstrate that among different coupling agents, the silane coupling agent KH570 has the best effects on PVC composites and the optimum portion is 2%. When the portions of PVC are one hundred shares, the best filling portions of carbide slag modified with KH570 are twenty shares. The TGA data indicate that with the addition of modified carbide slag, composites show better thermal stability.

    参考文献
    相似文献
    引证文献
引用本文

陈韩江, 田生慧, 何慧.电石渣增强改性聚氯乙烯塑料[J].高分子材料科学与工程,2015,31(12):98-103. Hanjiang Chen, Shenghui Tian, Hui He. Properties of Polyvinyl Chloride Based on Carbide Slag[J]. Polymer Materials Science & Engineering,2015,31(12):98-103.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司