聚醚嵌段酰胺/多壁碳纳米管混合基质膜的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

863基金资助项目(2012AA03A611);国家科技支撑计划(2011BAC08B00)


Preparation and Characterization of Poly(Amide-6-b-Ethylene Oxide)/Multi-Walled Carbon Nanotubes Mixed Matrix Membranes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚醚嵌段酰胺(Pebax1657)和多壁碳纳米管(MWNTs)为膜材料制备了Pebax/MWNTs混合基质膜(MMMs),研究了MWNTs对混合基质膜各种性能的影响。MWNTs在Pebax基质中形成团聚,它的加入抑制了Pebax中PA链段的结晶,导致结晶度下降;MWNTs加入后膜材料变脆,与纯膜相比,Pebax/MWNTs MMMs的弹性模量增大,而断裂伸长率和拉伸强度降低。另外,加入MWNTs后混合基质膜气体渗透系数大幅度提高,而CO2/非极性气体选择性基本不变,打破了聚合物中渗透系数和选择性之间常见的tradeoff关系,即MWNTs的加入显著提高了膜材料的气体分离性能。

    Abstract:

    Poly (amide-6-b-ethylene oxide) (Pebax1657) and multi-walled carbon nanotubes (MWNTs) were used to prepare Pebax/MWNTs mixed matrix membranes (MMMs). The effect of MWNTs on the performance of Pebax/MWNTs MMMs was studied. MWNTs are agglomerated in Pebax matix. The crystallization of Pebax decreases with the addition of MWNTs. Pebax/MWNTs MMMs are brittler than pristine Pebax membrane. Compared with pristine Pebax membrane, the elasticity modulus of Pebax/MWNTs MMMs increases, while the strain at break and the tensile strength decrease. For gas permeation properties, the gas permeabilities of Pebax/MWNTs MMMs substantially increase with the addition of MWNTs, while CO2/light gases selectivities almost do not change, which break through the common trade-off relationship between gas permeabilities and selectivities. The gas permeation properties of Pebax are remarkably enhanced by the incorporation of MWNTs.

    参考文献
    相似文献
    引证文献
引用本文

赵丹, 李晖, 邱永涛, 任吉中, 邓麦村.聚醚嵌段酰胺/多壁碳纳米管混合基质膜的制备及性能[J].高分子材料科学与工程,2015,31(12):115-119. Dan Zhao, Hui Li, Yongtao Qiu, Jizhong Ren, Maicun Deng. Preparation and Characterization of Poly(Amide-6-b-Ethylene Oxide)/Multi-Walled Carbon Nanotubes Mixed Matrix Membranes[J]. Polymer Materials Science & Engineering,2015,31(12):115-119.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司