含氟有机硅改性环氧树脂复合材料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

吉林省科技厅科技发展计划资助项目(20120319)


Preparation and Properties of Fluorinated Silicone Modified Epoxy Resin Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以二苯基硅二醇、甲苯二异氰酸酯和八氟戊醇为主要原料合成了一种含氟有机硅改性剂(FSM),将其与环氧树脂及固化剂混合制备环氧复合材料,这种材料具有机硅和有机氟的特性。通过热失重分析、接触角分析、表面元素分析、冲击强度分析,得出该复合材料中当含氟有机硅改性剂的含量达到20 phr时,最大热失重速率温度达到375 ℃,接触角达到120.8°;当含氟有机硅改性剂的含量达到15 phr时,冲击强度相比于纯环氧树脂上升了83%。同时该改性剂的分子结构中含有能与环氧树脂固化的活性基团,在与异佛尔酮二胺的复配使用中,既起到了改性剂的作用,又起到了固化剂的作用。

    Abstract:

    A fluorinated silicone modified agent was prepared via polymerization of diphenyl silicone glycol, toluene diisocyanate and octafluoro pentanol, and then was mixed with epoxy resin and curing agent, after that got epoxy composites. This material has characteristics of organic silicon and organic fluorine. The thermal gravimetric analysis,contact angle analysis, surface elemental analysis and impact strength analysis were used to study epoxy composites. It comes to the conclusion that when the content of fluorine containing silicone modified agent reaches 20 phr, the maximum heat loss rate temperature reaches 375 ℃ and the contact angle is 120.8°. And the impact strength increases by 83% compared to the pure epoxy resin when the content of fluorine containing silicone modified agent reaches 15 phr. The molecular structure of the modifier contains the active groups which can cure epoxy resin, so it has effects of modifier and curing agent.

    参考文献
    相似文献
    引证文献
引用本文

管东波, 蔡中义, 方程, 邱小明, 窦艳丽.含氟有机硅改性环氧树脂复合材料的制备与性能[J].高分子材料科学与工程,2015,31(12):120-125. Dongbo Guan, Zhongyi Cai, Cheng Fang, Xiaoming Qiu, Yanli Dou. Preparation and Properties of Fluorinated Silicone Modified Epoxy Resin Composite[J]. Polymer Materials Science & Engineering,2015,31(12):120-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司