含硅氧烷环氧树脂的制备及其性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51363004);广西区自然科学基金资助项目(2014GXNSFBA 118244)


Characterization and Properties of Epoxy Resin Containing Silicone
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以含氢硅油为底物,通过硅氢化加成反应制备了侧链富含环氧基团的有机硅环氧树脂(PDMS-VCH),采用红外光谱、核磁共振氢谱对PDMS-VCH化学结构进行了确认,盐酸-丙酮滴定法测得PDMS-VCH的环氧值为0.43。对有机硅环氧与E51环氧复合体系的研究发现,PDMS-VCH对复合体系的微观结构具有明显的影响和调控作用。1%~2%的PDMS-VCH能够有效增加其韧性,随着PDMS-VCH用量增加,有机硅环氧树脂出现相分离,形成多孔材料。差示扫描量热分析结果显示复合材料的玻璃化转变温度随着PDMS-VCH含量增加而降低,证实了PDMS-VCH的加入改善了环氧树脂链段的柔顺性,从而有效增韧环氧树脂。动态力学分析、热失重分析的结果同样表明少量的PDMS-VCH与环氧相容,富余的有机硅环氧发生迁移和聚集。

    Abstract:

    A silicone-epoxy copolymer containing epoxy groups on the PDMS side chain was synthesized by hydrosilylation reaction, and the resulting polydimethylsiloxane- (4-vinyl-1-cyclohexene-1,2-epoxide) (PDMS-VCH) copolymer was mixed with bisphenol A epoxy resin E51 to modify characteristics of the latter. The structure of PDMS-VCH was characterized by FT-IR, 1H-NMR, and epoxy equivalent weight titration etc. The results show that, the epoxy value of PDMS-VCH is 0.43. Microstructure studies show that adding 1%~2% of PDMS-VCH modified epoxy resin can effectively increase toughness of the cured epoxy resin. However, with the increase of content of PDMS-VCH, the cured resin is divided into two phases and forms porous materials. Thermal properties analysis also indicates that a little amount of PDMS-VCH can dissolve in epoxy resin matrix, and redundant silicone migrates and aggregates to be porous monolith.

    参考文献
    相似文献
    引证文献
引用本文

彭锦雯, 黄雪冰, 陈信东, 樊新, 彭啸, 邓卫星.含硅氧烷环氧树脂的制备及其性能[J].高分子材料科学与工程,2015,31(12):137-141. Jinwen Peng, Xuebing Huang, Xindong Chen, Xin Fan, Xiao Peng, Weixing Deng. Characterization and Properties of Epoxy Resin Containing Silicone[J]. Polymer Materials Science & Engineering,2015,31(12):137-141.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司