氟化改性国产芳纶Ⅲ纤维(F-3A)复合材料的界面性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Interfacial Properties of the Fluorinationized Domestic Aramid Fiber (F-3A) Reinforced Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了改善国产芳纶Ⅲ纤维(F-3A)增强树脂基复合材料界面性能,利用氟化改性技术对F-3A纤维表面进行改性,采用扫描电子显微镜、红外光谱、X射线光电子能谱对氟化改性F-3A纤维表面结构及元素组成进行表征,然后通过纤维复丝性能和NOL环层间剪切性能对复合材料界面性能进行评价。研究结果表明,(1)氟化改性在F-3A纤维表面物理刻蚀形成大量微槽结构,氟化学反应形成大量含氧和含氟的极性官能团,有利于复合材料界面粘接性的提高;(2)采用氟化工艺2处理后,F-3A纤维复合材料的NOL环层间剪切强度最高分别达到56.3 MPa和56.1 MPa,比未改性处理提高了20%以上,复合材料综合性能达到最佳。

    Abstract:

    In order to improve interfacial properties of aramid fiber(F-3A) reinforced composites, The fluorination technique was applied to treat the surface of F-3A fiber. The change of the surface structure and chemical composition were characterized by FT-IR, XPS, and SEM analysis,and the composite interfacial properties were evaluated by multifilament property and interlaminar shear strength of NOL rings. The results show: (1) a mass of micrometer-scaled holes are etched on the surface of F-3A fiber, and abundant oxygen functional groups and fluorine functional groups are also produced after fluorination, both of above favor improvement of composites interfacial bonding; (2) the interlaminar shear strength of NOL rings reaches 56.3 MPa and 56.1 MPa by the second fluorination process, which increase more than 20% compared with unmodified F-3A fiber, the comprehensive performance of composite material achieves optimum.

    参考文献
    相似文献
    引证文献
引用本文

张阳, 方毅, 刘向阳, 王斌, 程文, 刘爱华.氟化改性国产芳纶Ⅲ纤维(F-3A)复合材料的界面性能[J].高分子材料科学与工程,2016,32(1):68-73. Yang Zhang, Yi Fang, Xiangyang Liu, Bing Wang, Wen Cheng, Aihua Liu. Interfacial Properties of the Fluorinationized Domestic Aramid Fiber (F-3A) Reinforced Composite[J]. Polymer Materials Science & Engineering,2016,32(1):68-73.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司