Abstract:Poly-DL-lactic acid (D,L-PLA) and polycaprolactone (PCL) were blended with a certain percentage, then dissolved in pure dichloromethane and the solutions were cast on clean polyfluortetraethylene plate to form films. Highly crystalline polycaprolactone was used as nucleating agent to induce crystallization of the amorphous poly-DL-lactic acid. Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction and polarizing microscope were used to study the crystallinity and the change of crystallization behavior, explore the crystallization mechanism of polycaprolactone / poly-DL-lactic acid (D,L-PLA) blend films. The results show that the higher mass fraction of polycaprolactone in blend films, the lower degree of crystallinity of the film surfaces. Poly-DL-lactic acid and polycaprolactone are incompatible during the process of film formation. Polycaprolactone can induce poly-DL-lactic acid to form α-type crystal, and the crystallinity is closely related to the mass fraction of polycaprolactone. When the addition of polycaprolactone is 1%( mass fraction), the degree of crystallinity of the blend films is the highest. Although the higher addition of polycaprolactone leads to the lower degree of crystallinity of the blend films, the crystallinities of all the blend films are higher than of the pure poly-DL-lactic acid film.