甲基丙烯酸甲酯固相接枝蔗渣对聚乙烯醇/淀粉共混物结构与性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省部产学研项目(2013B090500085);广州市产学研协同创新项目(201508010022)


Sugar Cane Bagasse Grafted with MMA in Solid-Phase and Its Effect on the Structure and Properties of PVA/Starch Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    首次采用固相接枝法将甲基丙烯酸甲酯(MMA)接枝到碱处理后的甘蔗渣(SCB)表面,得到接枝改性蔗渣SCB-g-MMA,通过红外光谱、核磁共振和扫描电镜表征了SCB-g-MMA的结构,表明MMA已经成功接枝到SCB上。将SCB-g-MMA作为改性剂加入到聚乙烯醇(PVA)/淀粉复合材料基体中,扫描电镜测试表明在SCB-g-MMA存在的情况下,复合材料的界面模糊,相容性较好。SCB-g-MMA的用量对其在PVA/淀粉基体中的分散产生了一定的影响,当用量为10phr时,SCB-g-MMA出现团聚现象。拉伸强度和断裂伸长率在SCB-g-MMA含量为7 phr时达到最大,相比于PVA/淀粉基体分别提升了153.1%和277.5%。

    Abstract:

    Sugar cane bagasse (SCB)-g-methyl methacrylate (MMA) was prepared by solid-phase grafting method. The structure of SCB-g-MMA was characterized by FT-IR, NMR and SEM. The results show that MMA is successfully grafted to the surface of SCB. Then SCB-g-MMA was used to modify polyvinyl alcoho (PVA)/starch blends. The morphology of the blends was investigated by SEM. The results indicate that the interface between SCB-g-MMA and PVA/starch is fuzzy, which indicate that SCB-g-MMA is compatible well with PVA/starch. The dispersion of SCB-g-MMA in PVA/Starch blend is uniform when the dosage of SCB-g-MMA is less than 10phr; the agglomeration happens when the dosage of SCB-g-MMA is 10phr. The tensile strength and breaking elongation of the blends are improved by 153.1% and 277.5%,respectively comparing with PVA/starch blend when the dosage of SCB-g-MMA is 7phr.

    参考文献
    相似文献
    引证文献
引用本文

戈明亮, 郑罗云, 周向阳, 杜明艺, 贾志欣.甲基丙烯酸甲酯固相接枝蔗渣对聚乙烯醇/淀粉共混物结构与性能的影响[J].高分子材料科学与工程,2016,32(1):79-82. Mingliang Ge, Luoyun Zheng, Xiangyang Zhou, Mingyi Du, Zhixin Jia. Sugar Cane Bagasse Grafted with MMA in Solid-Phase and Its Effect on the Structure and Properties of PVA/Starch Blends[J]. Polymer Materials Science & Engineering,2016,32(1):79-82.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司