叶片塑化输运单元与单螺杆塑化系统组合式挤出机及其挤出特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金联合基金项目(U1201242);广东省教育部产学研结合项目(2013B090600066);东莞市产学研合作项目(2014509105214);中央高校基本科研业务费专项资金资助(2105ZZ067,2015ZZ132)


Extrusion Characteristics of Extruder Composed of Vane Plasticizing Conveying Unit and Single Screw Extrusion System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将具有正位移输送特性的叶片塑化输运单元(VPCU)与基于摩擦输运机理的单螺杆塑化输运系统相结合,开发了新型的单轴高分子材料塑化挤出机。详细介绍了组合式挤出机的结构及工作原理,实验研究了加工工艺参数、设备结构参数对挤出特性的影响。研究结果表明,叶片塑化输运单元可代替常规单螺杆挤出机的固体输送段,大大缩短了塑化输运系统的轴向长度,降低了设备的体积、质量,减少了物料所经历的热机械历程。与常规单螺杆挤出机相比,叶片挤出机具有正位移输送特性,口模压力、物料特性等对产量的影响比常规单螺杆挤出机小,挤出更稳定。

    Abstract:

    A new type of single shaft extruder was developed by integrating the vane plasticizing conveying unit (VPCU) and single screw plasticizing system. The conveying mechanism of VPCU is based on positive displacement. The conveying mechanism of single screw system is dominated by friction conveying. The structure and working principle was described in detail. Experiments were carried to study the influence of processing parameters and equipment structure on extrusion characteristics of the new extruder. The experiment results show that a VPCU can be used to replace the solid conveying section of a traditional single screw. The axial length, volume and mass of the new extruder can be greatly reduced, which can shorten the thermomechanical history of materials suffered during processing. In contrast with a traditional single screw extruder, the new extruder has some excellent properties such as positive displacement conveying mechanism, the die pressure and material properties have little effect on the output and the extrusion processing is more stable.

    参考文献
    相似文献
    引证文献
引用本文

殷小春, 王亮, 瞿金平, 何光建, 林城, 杨智韬.叶片塑化输运单元与单螺杆塑化系统组合式挤出机及其挤出特性[J].高分子材料科学与工程,2016,32(1):110-114. Xiaochun Yin, Liang Wang, Jinping Qu, Guangjian He, Cheng Lin, Zhitao Yang. Extrusion Characteristics of Extruder Composed of Vane Plasticizing Conveying Unit and Single Screw Extrusion System[J]. Polymer Materials Science & Engineering,2016,32(1):110-114.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司