热熔挤出过程药物在聚己内酯中的分散形态及对药物释放行为的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51303111,21174091);博士点基金新教师类(20130181120122);四川省应用基础(2014JY0131)


Preparation of Poly(ε-Caprolactone) Based Drug Release Systems Through Hot-Melt Extrusion and Its Effect on the Dispersion and Release Behavior of the Drugs
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚己内酯(PCL)为基体、2种难溶性药物布洛芬(BF)和双氯芬酸钠(DS)为模型药物,采用热熔挤出(HME)技术制备了2种载药体系;通过差示扫描量热法、X射线衍射和扫描电镜等表征了药物在PCL基体中的分散形态,探讨了药物分散形态对其释放行为的影响。结果表明,低熔点的药物BF以无定形态均匀分散于PCL中;而高熔点的药物DS仍以结晶形态分散于PCL中(药物颗粒直径约0.5 μm)。在原药溶解度相差不大的情况下,由于在挤出过程2种药物的分散形态不同,挤出产物中BF的释放速率明显快于DS。

    Abstract:

    Poly(ε-caprolactone) (PCL) based drug release systems were prepared through hot-melt extrusion (HME). Two poorly water-soluble drugs, ibuprofen (BF) and diclofenac sodium (DS), were used as model drugs. DSC, XRD and SEM results reveal that the dispersion of drugs were different due to their different melting temperatures; in-vitro release tests exhibit the different release behavior between BF and DS from the PCL matrix. Based on the experimental results, it is speculated that BF is amorphous or well dispersed in the PCL matrix after HME, while DS is dispersed as crystal particles (the particle diameter is around 0.5 μm). The drug release behavior exhibits that the release of BF is much faster than that of DS, which is mainly due to the different dispersion and morphology of two drugs.

    参考文献
    相似文献
    引证文献
引用本文

陈霞, 张聪, 刘桂廷, 陈蓉, 郭少云.热熔挤出过程药物在聚己内酯中的分散形态及对药物释放行为的影响[J].高分子材料科学与工程,2016,32(1):115-119. Xia Chen, Cong Zhang, Guiting Liu, Rong Chen, Shaoyun Guo. Preparation of Poly(ε-Caprolactone) Based Drug Release Systems Through Hot-Melt Extrusion and Its Effect on the Dispersion and Release Behavior of the Drugs[J]. Polymer Materials Science & Engineering,2016,32(1):115-119.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司