静电纺丝制备聚吲哚导电纳米纤维及其性能表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Characterization of Polyindole Conductive Nanofibers by Electrospinning Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用化学氧化还原法合成了聚吲哚,利用静电纺丝技术制备了聚吲哚导电纳米纤维,并通过正交实验优化工艺参数为纺丝液浓度2%,挤出速率1 mL/h,纺丝电压20 kV,接收距离18 cm,最终制得直径为216 nm的聚吲哚导电纳米纤维。利用扫描电镜、红外光谱、X射线衍射、差示扫描量热恩熙及电导率测试对聚吲哚纳米纤维的结构和性能进行了表征,结果表明,静电纺丝过程中聚吲哚的分子链结构并没有发生明显变化;静电纺聚吲哚纳米纤维的结晶更完善、电导率提升了近120%。静电纺丝后聚吲哚的玻璃化转变温度和熔融温度变化不大,分别在130 ℃和240 ℃附近,但热降解温度从465 ℃下降至420 ℃。

    Abstract:

    Polyindole was synthesized by chemical oxidation. The polyindole conductive nanofibers were successfully prepared by electrospinning method. Orthogonal test was designed to optimize electrospinning parameters as followings: spin solution concentration 2%,extrusion speed 1 mL/h,applied voltage 20kV, collection distance 18 cm, at which the polyindole nanofibers with the average diameter of 216 nm can be prepared. The structure and performance of polyindole nanofiber were characterized by SEM, FT-IR, DSC, XRD and electrical conductivity test. The chemical structure polyindole molecular chain has little changes during the electrospinning process. The crystal structure of the polyindole becomes more perfect and the electrical conductivity is improved about 120% after electrospinning. The glass transition temperature and melting temperature of polyindole remain almost the same around 130 ℃ and 240 ℃ before and after electrospinning. However, the thermal degradation temperature decreases from 465 ℃ to 420 ℃.

    参考文献
    相似文献
    引证文献
引用本文

蔡志江, 贾建茹, 郭杰, 徐熠, 王闯开.静电纺丝制备聚吲哚导电纳米纤维及其性能表征[J].高分子材料科学与工程,2016,32(1):137-141. Zhijiang Cai, Jianru Jia, Jie Guo, Yi Xu, Chuangkai Wang. Preparation and Characterization of Polyindole Conductive Nanofibers by Electrospinning Method[J]. Polymer Materials Science & Engineering,2016,32(1):137-141.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司