一种透明环氧改性有机硅树脂的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51353003);浙江省自然科学基金资助项目(Y4080264, LY14E030008);中国博士后科学基金(2013M 531455);浙江省公益性技术应用研究计划项目(2013C31079)


Preparation and Performances of a Kind of Transparent Epoxy-Modified Silicone Resins
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用二甲基二乙氧基硅烷与γ-(2,3-环氧丙氧) 丙基三甲氧基硅烷为原料,经溶胶凝胶法,制备了透明的环氧改性有机硅树脂预聚物。将所得环氧改性有机硅树脂预聚物在4-甲基六氢苯酐为固化剂,二甲基苄胺为促进剂,经80 ℃固化1 h,120 ℃固化1 h,150 ℃固化2 h后,获得透明的环氧改性有机硅树脂固化物。研究了固化物的性能,结果表明,随着R/Si值增大,所得透明环氧树脂的透光率逐渐升高,但其硬度、玻璃化转变温度和热分解温度都逐渐降低。总体而言,当环氧改性有机硅树脂R/Si=1.6时,固化物具有很高的透光率,较好的热稳定性,可调的硬度,对基材有良好的粘接力,这表明所得环氧改性有机硅树脂有望用于光学透明器件的封装。

    Abstract:

    Transparent epoxy-modified silicone resins were produced through sol-gel method with γ-(2,3-epoxypropoxy)propytrimethoxysilane and dimethyldiethoxylsilane catalyzed by HCl. Subsequently, the epoxy-modified silicone resins obtained were cured with hexahydro-4-methylphthalic anhydride accelerated by N-benzyldimethylamine. The performances of the cured epoxy-modified silicone resin were investigated and discussed in detail. As to the cured epoxy-modified silicone resins obtained, the transparency increases while the hardness, glass transition temperature and thermal decomposition temperature decrease with the increment of R/Si value in the range of 1.4 and 1.7.Generally speaking, the cured epoxy-modified silicone resins with R/Si=1.6 expresse fairly high transparency, good thermal stability, adjustable hardness (15~70 Shore D) and fairly high adhesion-stress, which indicates that the epoxy-modified silicone resins obtained can be good candidate for optical devices package.

    参考文献
    相似文献
    引证文献
引用本文

刘佳, 杨雄发, 陈琼, 陈忠红, 罗蒙贤, 来国桥.一种透明环氧改性有机硅树脂的制备与性能[J].高分子材料科学与工程,2016,32(1):164-168. Jia Liu, Xiongfa Yang, Qiong Chen, Zhonghong Chen, Mengxian Luo, Guoqiao Lai. Preparation and Performances of a Kind of Transparent Epoxy-Modified Silicone Resins[J]. Polymer Materials Science & Engineering,2016,32(1):164-168.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司