氨基改性碳纳米管的制备及对聚氨酯泡沫材料的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

第13届中日国际科技合作项目资助(2010DFA52070)


Effect of Amino-Modified Carbon Nanotubes on the Pore Structure of Polyurethane Foams
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在碳纳米管表面引入大量氨基后,将其加入水为发泡剂的聚氨酯发泡体系,研究了碳纳米管对聚氨酯泡沫泡孔结构和力学性能的影响。实验结果表明,氨基表面改性碳纳米管的引入有助于提高聚氨酯泡沫孔壁结构的完整性,并且泡孔分布更加均匀。随着体系中碳纳米管含量的增加,泡沫孔径尺寸先减小后增大,当填充量为0.75%时,泡沫材料具有最小平均孔径(0.23mm)。扫描电子显微镜观察发现该条件下泡孔分布均匀,结构最为完整。同时,材料的力学性能也表现出相同的规律,当碳纳米管含量为0.75%时,材料具有最大压缩强度和压缩模量,分别为0.14 MPa和2.09 MPa,与纯聚氨酯的泡沫材料相比分别提高了100%和161%。

    Abstract:

    The surface modification of multi-walled carbon nanotubes (MWCNTs-NH2) was achieved and then introduce into polyurethane foams (PUFs), which resulted in the improved pore structure and mechanical properties. It is shown that PUFs have a perfect pore structure and a uniform pore distribution when MWCNTs-NH2 is added. With the increasing amounts of MWCNTs-NH2, the pore size of PUFs decreases in the beginning and then increases, with the smallest average size of 0.23 nm as the content reaches 0.75%. In this instance, the PUFs have a perfect wall structure and uniform pore distribution, and the mechanical properties of sample exhibit the same trend corresponding to SEM observations. The PUFs exhibit the maximum compressive strength and modulus of 0.14 MPa and 2.09 MPa, which are increased by 100% and 161% compared with pure PUFs, respectively.

    参考文献
    相似文献
    引证文献
引用本文

侯明月, 李昂, 邹威, 励杭泉, 张晨.氨基改性碳纳米管的制备及对聚氨酯泡沫材料的影响[J].高分子材料科学与工程,2016,32(1):179-183. Mingyue Hou, Ang Li, Wei Zou, Hangquan Li, Chen Zhang. Effect of Amino-Modified Carbon Nanotubes on the Pore Structure of Polyurethane Foams[J]. Polymer Materials Science & Engineering,2016,32(1):179-183.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司