Abstract:To dissolve cellulose in the NaOH/urea aqueous solution at low temperature is an environmental friendly and low cost method. In this study, high water absorbent cellulose sponge was prepared by freezing method, in which NaOH/urea aqueous solution was used as solvent system, microcrystalline cellulose was raw material, anhydrous sodium sulfate was poreforming agent and combed cotton was used as reinforced fibers. The effects of microcrystalline cellulose powder concentration, reinforced fibers concentration, pore forming agent amount and particle size on the morphology, water absorption, density and mechanical properties were studied by scanning electron microscopy, electronic material testing machine and mass change method. The results show that the microcrystalline cellulose concentration, reinforced fibers concentration, pore forming agent amount and particle size are key parameters which could affect the performance of cellulose sponge. When the microcrystalline cellulose content is m(microcrystalline cellulose)/m(S)=6/100, m(reinforced fibers)=3/100, the pore forming agent content is m(forming agent)/m(S)=140/100 and the particle size is 0.125~0.18 mm, properties of the cellulose sponge is better than others, and the water absorption is higher than 900%.