碳纤维对聚碳酸酯/氮化硼复合材料导热性能和力学性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effects of Carbon Fiber on the Thermal Conductivity and Mechanical Property of Polycarbonate/BN Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    首先制备了聚碳酸酯/氮化硼(PC/BN)复合材料,考察了BN含量对复合材料导热性能和力学性能的影响,实验结果表明BN可以提高PC的导热性能,当BN含量为30%时,PC/BN复合材料的导热系数为1.38 W/(m·K),比纯PC的导热系数提高了约7倍,但PC的力学性能损坏严重。在PC/BN复合材料中填充少量碳纤维(CF),结果表明少量CF的加入,不仅可以进一步提高PC/BN复合材料的导热性能,而且还可以较显著地改善其力学性能。当CF含量为7%时,PC/BN/CF的导热系数、拉伸强度、弯曲强度和冲击强度比PC/BN复合材料的分别提高了14.5%,113%,64%和157%。

    Abstract:

    The effects of BN content on the thermal conductivity and mechanical property of polycarbonate (PC) composites were investigated. The results show that with the addition of BN, the thermal conductivity of PC composites is improved. When the BN content is 30%, the thermal conductivity of PC/BN composites is 1.38 W/(m·K), increased by 7 folds over pure PC. However, high content of BN deteriorate the mechanical property of PC composites. Then PC/BN composites reinforced with carbon fiber (CF) was prepared. It is found that CF can further improve the thermal conductivity and mechanical property of PC/BN composites. When the CF content is 7%, the thermal conductivity, tensile strength, bending strength, impact strength of PC/BN/CF composites are increased by 14.5%, 113%, 64% and 157% respectively, compared with PC/BN composites.

    参考文献
    相似文献
    引证文献
引用本文

张峰, 李秋影, 吴驰飞, 郭卫红.碳纤维对聚碳酸酯/氮化硼复合材料导热性能和力学性能的影响[J].高分子材料科学与工程,2016,32(2):49-53. Feng Zhang, Qiuying Li, Chifei Wu, Weihong Guo. Effects of Carbon Fiber on the Thermal Conductivity and Mechanical Property of Polycarbonate/BN Composites[J]. Polymer Materials Science & Engineering,2016,32(2):49-53.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-26
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司