乙炔基聚酰亚胺/氰酸酯互穿网络结构的固化动力学及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

黑龙江省青年基金(QC2014C008);黑龙江省科学院基金(2014-YQ-01,2015-YX-02,2015-YQ-08)


Curing Kinetics and Properties of Ethynyl Terminated Polyimide and Cyanate Ester Sequential Interpenetrating Polymer Network System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成兼具高热稳定性(Td5%=508 ℃)和高玻璃化转变温度(Tg=374.2 ℃)的乙炔基封端的聚酰亚胺低聚物(S1),并将其与双酚A型氰酸酯树脂(BCE)进行共混,以提高氰酸酯包括热性能在内的综合性能,制备了S1/BCE互穿网络结构树脂体系。采用差示扫描量热分析、傅里叶变换红外光谱,利用Kissinger-Crane法和T-β外推法研究了BCE和S1的固化动力学行为和固化机理。并对固化后材料的热性能、力学性能和表面形貌进行了研究。结果表明,从红外及动力学分析,S1/BCE体系的固化工艺参数为200 ℃/2 h+260 ℃/2 h,2种方法测得的以质量比1∶1混合的树脂体系CS11平均表观活化能为88.9 kJ/mol,反应级数为0.91。不同比例下S1/BCE体系固化后的玻璃化转变温度最高相均超过300 ℃,且在212 ℃依然有较高的模量保持,同时从电镜图和力学性能可以看出,材料韧性具有一定程度的提升。相比较而言,以质量比1∶1混合的树脂体系CS11的韧性提升最大,Tg=310.9 ℃,Td5%=424 ℃,且具有优良的耐热性能。

    Abstract:

    Cyanate ester with diallyl bisphenol A (BCE)was modified with ethynyl terminated polyimide(S1), and the S1/BCE system with completely interpenetrating networks was prepared. The curing kinetics process and curing mechanism of S1/BCE system were investigated by non-isothermal differential scanning calorimetry,Fourier transform infrared spectroscopy, Kissinger-Crane method and temperature-heating speed extrapolation method. The thermal performance,machanical property and surface appearance of the cured system were also investigated. The results show that the curing process of S1/BCE resin is 200 ℃/2 h+260 ℃/4 h. The average apparent activation energy is 88.9 kJ/mol, and the curing reaction order is 0.91. The highest glass transition temperature of CS11 is 310 ℃ and the modulus of the system still has a good keeping up to 212 ℃. In comparison, the toughness of the system increases through measurements of SEM and mechanical property and it has excellent mechanical properties. In addition,the glass transition temperature of CS11 is 310.9 ℃, and the initial decomposition temperature (Td5%) of the system is 424 ℃.

    参考文献
    相似文献
    引证文献
引用本文

曲春艳, 肖万宝, 王德志, 刘长威, 李洪峰.乙炔基聚酰亚胺/氰酸酯互穿网络结构的固化动力学及性能[J].高分子材料科学与工程,2016,32(2):83-89. Chunyan Qu, Wanbao Xiao, Dezhi Wang, Changwei Liu, Hongfeng Li. Curing Kinetics and Properties of Ethynyl Terminated Polyimide and Cyanate Ester Sequential Interpenetrating Polymer Network System[J]. Polymer Materials Science & Engineering,2016,32(2):83-89.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-26
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司