退火对剪切改性的长链支化聚丙烯流变性能回复的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Annealing on the Recovery of Rheological Properties of Shear Modified Long Chain Branched Polypropylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用密炼机对长链支化聚丙烯(LCB-PP)施加一定的剪切历程,随后利用真空退火和高压二氧化碳(CO2)饱和退火对剪切改性的样品作后处理。通过熔体流动速率(MFR)、挤出胀大比(SR)以及动态流变数据等表征方法,研究了退火工艺对剪切改性样品流变性能的回复作用。结果表明,退火使流变性能得到一定回复,包括MFR减小,SR增大,低频下的储能模量和复数黏度增大。MFR和SR的结果表明,CO2的存在使得解缠结的支链能更快恢复缠结状态,因此高压CO2饱和退火法加速了流变性能的回复。通过分析损耗角正切、Cole-Cole曲线,也证明了高压CO2饱和退火法对剪切改性样品流变性能回复的作用比真空退火法更显著。

    Abstract:

    Shear history was applied to long chain branched PP (LCB-PP) by an internal batch mixer. Then vacuum annealing and high-pressure CO2 saturation annealing were performed on samples after shear modification. The effects of annealing process on the recovery of rheological properties of shear modified LCB-PP were characterized by melt flow rate(MFR), swelling ratio(SR) and dynamic rheological data. The results indicate that the rheological properties of shear modified LCB-PP can be recovered partially after annealing, including lower MFR, higher SR and larger storage modulus and complex viscosity at low frequency. The results of MFR and SR demonstrate that the presence of CO2 makes disentangled branched chains recover to entanglement state more quickly, so the recovery of rheological properties is speeded by high pressure CO2 saturation annealing. As for the recovery of rheological property of shear modified LCB-PP, the analyses of tanδ and Cole-Cole plot also verify that high-pressure CO2 saturation annealing is much more effective than vacuum annealing.

    参考文献
    相似文献
    引证文献
引用本文

罗祎玮, 信春玲, 朱伟林, 杨丽含, 何亚东.退火对剪切改性的长链支化聚丙烯流变性能回复的影响[J].高分子材料科学与工程,2016,32(2):121-125. Yiwei Luo, Chunling Xin, Weilin Zhu, Lihan Yang, Yadong He. Effect of Annealing on the Recovery of Rheological Properties of Shear Modified Long Chain Branched Polypropylene[J]. Polymer Materials Science & Engineering,2016,32(2):121-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-26
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司