三嗪膨胀阻燃母粒的制备及在聚丙烯中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

黑龙江省科技攻关重大项目(GA12A102)


Preparation of Triazine Intumescent Flame Retardant Masterbatch and Its Application in Polypropylene Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以高熔指聚丙烯(HM-PP)粉料为基体,通过双螺杆挤出机将聚磷酸铵(APP)、三嗪成炭发泡剂(CFA)和纳米二氧化硅(SiO2)与聚丙烯进行捏合,经挤出、冷却及切粒后,制备三嗪膨胀阻燃母粒,同时研究了膨胀阻燃剂与聚丙烯基体的不同质量比对母粒加工性能的影响。将制备的阻燃母粒以一定的添加量与聚丙烯(M02)混合后直接注塑,制备阻燃聚丙烯材料,通过极限氧指数(LOI)和垂直燃烧(UL-94)测试研究了材料的阻燃性能,通过拉伸、弯曲和冲击性能的测试研究了材料的力学性能,通过扫描电镜对材料截面的测试研究了阻燃剂在材料中的分散性及相容性,同时还研究了阻燃PP材料的耐水性能。结果表明,在阻燃剂添加量为65%的时候,阻燃母粒具有很好的加工性能,加工过程中无断条现象。当母粒的添加量为33.8%(阻燃剂含量为22%)时,材料通过UL-94 V-0级,LOI值达到了34.3%,表现出很好的阻燃效果。与单独添加膨胀阻燃剂的阻燃PP材料相比,阻燃母粒与聚丙烯树脂具有更好的相容性且在树脂中分散均匀,阻燃母粒的加入提高了材料的力学性能,同时材料的耐水性能也得到了很好的提高,材料在耐水测试后依然能保持很好的阻燃性能。

    Abstract:

    In this paper, intumescent flame retardant masterbatch was prepared by incorporating ammonium polyphosphate (APP), charring-foaming agent (CFA) and nano-silica (SiO2) into polypropylene with high melt index (HM-PP) and then extruded through twin screw extruders. The effect of mass ratio between intumescent flame retardant and HM-PP on process property of masterbatch was also investigated. The obtained masterbatch was mixed with polypropylene (M02) and directly injected to prepare flame retardant PP composite. The flame retardant properties of PP composite were investigated by limiting oxygen index (LOI) and vertical burning (UL-94) tests, the mechanical properties were investigated by flexural strength and tensile strength, and the dispersion and compatibility of the flame retardant in materials were studied by scanning electron microscopy and the moisture resistance property was investigated. The results demonstrate that the flame retardant masterbatch can be continuously produced when the loading amount of flame retardant is 65%. The samples successfully pass UL-94 V-0 flammability rating and the LOI value reaches 34.3% when the loading amount of masterbatch is 33.8% with the flame retardant content of 22%. Compared with the flame retardant polypropylene obtained by incorporating flame retardant into matrix, the capability and dispersion of masterbatch in polypropylene matrix are enhanced. Meanwhile, the mechanical and water resistant properties of flame retardant polypropylene are also enhanced due to the introduction of flame retardant masterbatch and the flame retardant PP materials still remain excellent properties after water resistant tests.

    参考文献
    相似文献
    引证文献
引用本文

曹巍瀚, 许苗军, 李斌.三嗪膨胀阻燃母粒的制备及在聚丙烯中的应用[J].高分子材料科学与工程,2016,32(2):133-136. Weihan Cao, Miaojun Xu, Bin Li. Preparation of Triazine Intumescent Flame Retardant Masterbatch and Its Application in Polypropylene Composite[J]. Polymer Materials Science & Engineering,2016,32(2):133-136.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-26
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司