聚醋酸乙烯酯反向核壳结构乳胶粒制备及形成机制
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31270609,31570557);教育部博士点基金 (373-20130062110002);黑龙江省博士后科研启动基金(LBH-Q14004);黑龙江省自然科学基金资助项目(E201230);中央高校基本科研业务费基金(2572015AB01)


Fabrication and Formative Mechanism of Poly(Vinyl Actate)-Based Inverse Core/Shell Structural Latex Particles
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以马来酸酐(MA)作为接枝共聚单体,亲水性的聚醋酸乙烯酯(PVAc)为核,疏水性的聚苯乙烯(PSt)为壳,成功构建出一种新颖的PVAc-MA/PSt反向异形核壳结构乳胶粒,从而解决了因竞聚率差异大而无法实现醋酸乙烯酯(VAc)与苯乙烯(St)复合的难题。同时,利用接枝共聚所形成的过渡层,能够很好地抑制核壳翻转,从而成功地解决了反向核壳结构乳胶粒容易发生核壳翻转的问题。所制备出的反向核壳结构乳胶粒子平均粒径为330 nm左右,粒径大小均一。通过热力学分析发现所制备的乳胶粒呈明显的相分离结构,且存在PVAc-MA-PSt过渡层结构;乳胶粒的形貌随着MA含量的变化发生明显的衍变趋势,且粒子形貌变化可控。提出了PVAc-MA/PSt反向核壳乳胶粒子的形成机制。

    Abstract:

    Using maleic anhydride(MA) as graft-copolymeric monomer, a novel inverse anomalous core/shell latex particle of PVAc-MA/PSt was successfully structured with hydrophilic poly(vinyl acetate)(PVAc) as core and hydrophobic polystyrene(PSt) as shell by semi-continuous seed emulsion polymerization. Based on this, the compound difficulty owing to the reactivity ratio difference and the influence of “core/shell turning” due to hydrophilic difference between vinyl acetate and styrene of the two monomer can be eliminated. The particle size of the latex particles is 330nm and has a uniform distribution. The special structure of core/shell latex particle, the phase separation structure and transition layer structure that was comprised of PVAc-MA/PSt compound, was revealed by thermodynamic analysis. Meanwhile, electron microscopic analysis show that the morphology of latex particle has an evolving tendency and the latex morphology could be controlled by the changing of MA content. Finally, the formation mechanism of PVAc-MA/PSt inverse core/shell latex particle was proposed.

    参考文献
    相似文献
    引证文献
引用本文

张霄, 白龙, 娄春华, 李铁强, 顾继友, 李志国.聚醋酸乙烯酯反向核壳结构乳胶粒制备及形成机制[J].高分子材料科学与工程,2016,32(2):150-154. Xiao Zhang, Long Bai, Chunhua Lou, Tieqiang Li, Jiyou Gu, Zhiguo Li. Fabrication and Formative Mechanism of Poly(Vinyl Actate)-Based Inverse Core/Shell Structural Latex Particles[J]. Polymer Materials Science & Engineering,2016,32(2):150-154.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-01-26
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司