高邻位硼酚醛纤维的合成及表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(U1404507);国家留学基金项目(201308410358,201508410397)


Preparation and Characterization of High-Ortho Boron-Containing Phenolic Fibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以苯酚、甲醛及硼酸为原料,醋酸锌、硫酸双催化聚合得到高邻位硼酚醛树脂,经熔融纺丝制得初生纤维,然后在甲醛、盐酸水溶液中缓慢升温溶液固化,在N2气氛中240 ℃热固化,获得高邻位硼酚醛纤维。利用傅里叶变换红外光谱研究了硼酚醛纤维固化过程中的结构变化,热重分析表明硼酸的加入增加了酚醛纤维的残炭率,扫描电镜图显示热固化后,纤维结构均一化,韧性增加。通过与硼酸共聚及纤维热固化提高了纤维的热性能,解决了高邻位酚醛纤维固化不均匀,力学性能差的问题。

    Abstract:

    The high-ortho boron-containing phenolic fibers (HBPFs) were prepared by the crosslinking of heat-meltable spun filaments derived from melt-spinning of the novolac resins copolymerized among phenol, formaldehyde and boric acid in the presence of zinc acetate and sulfuric acid catalyst, and cured in a combined solution of formaldehyde and hydrochloric acid. The resulting fibers were thermocured in N2 at tiered temperature. IR, TGA, SEM and electrical tensile strength apparatus were employed to characterize the change of functional groups, thermal performance, distribution of crosslinkage in the interior and surface, mechanical properties, and microstructure of fibers. The results show that the addition of boron in the precursor resin can increase the content of phenol borate B-O linkage, and thermal stability and mechanical strength of HBPFs.

    参考文献
    相似文献
    引证文献
引用本文

焦明立, 杨凯, 曹健, 刘红燕, 张旺玺, 余木火.高邻位硼酚醛纤维的合成及表征[J].高分子材料科学与工程,2016,32(3):22-26. Mingli Jiao, Kai Yang, Jian Cao, Hongyan Liu, Wangxi Zhang, Muhuo Yu. Preparation and Characterization of High-Ortho Boron-Containing Phenolic Fibers[J]. Polymer Materials Science & Engineering,2016,32(3):22-26.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司