聚左旋乳酸/聚丁二酸丁二醇酯共混物的结构与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

新世纪优秀人才计划(NCET120601);北京市教委重点基金(KZ201310012014);科技北京百名领军人才(LJ201305)


Preparation and Characterization of Poly( L-Lactic Acid)/Poly(Butylene Succinate) Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过熔融共混制备出一系列不同组成比的聚左旋乳酸(PLLA)/聚丁二酸丁二醇酯(PBS)/醋酸锌(Zn(OAc)2)样品,通过扫描电子显微镜、动态力学性能分析仪、差示扫描量热仪及力学性能测试等,研究了不同PBS及Zn(OAc)2含量对PLLA/PBS共混物的形态结构、结晶性能和力学性能的影响。结果表明,PLLA和PBS属于非相容体系,Zn(OAc)2的加入能降低PBS相区的尺寸,提高PLLA/PBS体系的相容性,且质量分数为0.05% 时增容效果最佳;PBS的加入可有效提高PLLA的结晶速率和结晶度;随着PBS含量的增加,共混物的断裂伸长率和冲击韧性与纯PLLA相比显著提高,共混物的断裂伸长率均在300%以上;当PLLA/PBS/Zn(OAc)2质量比为80/20/0.05时,共混物的综合性能最优。

    Abstract:

    Poly(L-lactide) (PLLA)/poly(butylene succinate) (PBS)/zinc acetate (Zn(OAc)2) blends with different compositions were prepared by melt blending. The morphology, crystallization behavior and mechanical properties of PLLA/PBS/Zn(OAc)2 blends were investigated by SEM, DMA, DSC and mechanical tests. The results show that PLLA/PBS blends are incompatible and exhibit phase-separated morphology. Addition of Zn(OAc)2 leads to a decrease of PBS domain size, thereby improving the compatibility between PLLA and PBS. The smallest domain size is found in PLLA/PBS blends containing 0.05% Zn(OAc)2. The addition of PBS can effectively improves the crystallization rate and crystallinity of PLLA. Moreover, the impact strength and the fracture elongation of PLLA/PBS blends increase with increasing PBS content compared with pure PLLA. The elongation at break of PLLA containing PBS is above 300%. The blend with m(PLLA)/m(PBS)/m(Zn(OAc)2)=80/20/0.05 shows the best mechanical properties.

    参考文献
    相似文献
    引证文献
引用本文

梁宁宁, 熊祖江, 王锐, 李根, 朱志国, 张秀芹.聚左旋乳酸/聚丁二酸丁二醇酯共混物的结构与性能[J].高分子材料科学与工程,2016,32(3):48-53. Ningning Liang, Zujiang Xiong, Rui Wang, Gen Li, Zhiguo Zhu, Xiuqin Zhang. Preparation and Characterization of Poly( L-Lactic Acid)/Poly(Butylene Succinate) Blends[J]. Polymer Materials Science & Engineering,2016,32(3):48-53.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司