Abstract:Polyurethane prepolymers, prepared by the reaction of hexamethylene diisocyanate (HDI) or toluene-2,4-diisocyanate (TDI) with different molecular weight of polyethylene glycol (PEG), were grafted onto the surface of nano-SiO2 to obtain polyurethane-modified nano-SiO2. The modified nano-SiO2 was dispersed into polyurethane acrylate (PUA) resin and cured by UV light to achieve nanohybrid coatings. The results of field-emission scanning electron microscope (FE-SEM) and differential scanning calorimetry (DSC) analysis indicate that the nano-SiO2 modified with polyurethane chain, compared with the unmodified one, can significantly improve the compatibility between nanoparticle and resin, as well as the thermal stability of nanohybrid coatings. Pendulum damping tester and film impactor were used to investigate the mechanical properties of nanohybrid coatings. The results indicate the hardness of the hybrid coating, without the expense of impact resistance, can be increased through adjusting the structure of prepolymer chain.