微波固化碳纤维/环氧树脂复合材料NOL环及其力学性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(11302249)


Mechanical Properties of NOL Rings of Carbon Fiber/Epoxy Composites Cured by Microwaves
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用微波固化技术,对碳纤维/环氧树脂复合材料NOL环进行了固化试验研究。综合运用红外光谱、微观CT扫描系统、力学拉伸试验机和扫描电子显微镜等试验方法分析材料的固化行为、微观形态及力学性能,并与传统热固化试样进行了对比。研究结果表明,微波固化方式与传统热固化方式的固化机理不同,微波固化可显著缩短固化周期;微波固化过程中未引入新的化学反应,且2种固化方式所获得的固化产物化学结构相同;CT扫描分析揭示出微波功率的大小对碳纤维复合材料孔隙率有着重要的影响;在相同固化温度条件下,微波固化复合材料NOL环的拉伸强度和层间剪切强度均低于热固化复合材料,这主要归因于微波固化复合材料具有较大的孔隙率;扫描电镜分析表明微波固化复合材料树脂和纤维的粘接情况要稍好于热固化复合材料。

    Abstract:

    Comparative studies were carried out on the NOL rings of carbon fiber/epoxy composites cured by microwave (MW) curing technique and thermal curing technique. The curing behavior, microstructure as well as mechanical properties of cured composites were well investigated through a series of methods and equipments including FT-IR, micro-CT system, mechanical tension test machine and SEM. The results show that the curing mechanism for MW curing technique is different from conventional thermal curing technique and the cure cycle is greatly shortened. FT-IR measurements reveal that MWs do not initiate any new chemical reactions during the curing process and both MW and thermally cured composites have the same chemical structure. CT scan analysis indicates that the MW power used in the curing process has significant effect on the void content of cured composites. Moreover, the MW cured composites exhibit lower tensile and interlaminar shear strength as compared to thermally cured counterparts when using same curing temperature, which is mainly ascribed to the higher void content contained in the MW cured composites. Furthermore, the adhension between the fiber and resin is slightly better for MW cured composites compared with thermally cured ones, which is confirmed by SEM micrographs.

    参考文献
    相似文献
    引证文献
引用本文

马仁利, 常新龙, 廖英强, 张晓军.微波固化碳纤维/环氧树脂复合材料NOL环及其力学性能[J].高分子材料科学与工程,2016,32(3):96-101. Renli Ma, Xinlong Chang, Yingqiang Liao, Xiaojun Zhang. Mechanical Properties of NOL Rings of Carbon Fiber/Epoxy Composites Cured by Microwaves[J]. Polymer Materials Science & Engineering,2016,32(3):96-101.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司