基于气液两相流的聚合物气辅挤出数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51163011、51463015);高等学校博士学科点专项科研基金(20093601110001);江西省研究生创新专项基金(YC2014-B004)


Numerical Simulation of Polymer Gas-Assisted Extrusion Based on Gas/Liquid Two-Phase Flow
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了更准确地反映气辅挤出中气体对熔体成型的影响机理,建立了气液两相流模型,对不同气压作用下的熔体挤出成型进行了有限元数值模拟,得到了气辅作用下熔体的流速、压力降和第一法向应力差等分布。与完全滑移边界条件的模拟结果对比发现,基于气液两相流的气辅挤出,熔体的流速、压力降和第一法向应力差等物理场均存在较大变化。实验也验证了熔体挤出成型受气压的影响较大。对模拟和实验结果分析表明,气体的辅助作用对熔体产生的第一法向应力差,是造成熔体流速、压力降和成型产生变化的主要原因。而这些是以完全滑移边界条件气辅模拟方法无法体现出来的。因此,气辅挤出模拟需要考虑气体层对熔体成型的影响,并且在实际气辅挤出加工中,需要合理地设置气压等工艺参数。

    Abstract:

    To more accurately represent the impact mechanism of gas on melt forming in gas-assisted extrusion(GAE), a gas/liquid two-phase flow model was established, and numerical simulation of GAE at different gas pressures was performed by finite element method, physical distributions of velocities, pressure drop and first normal stress difference were obtained. Compared with the simulation results of GAE based on full slip boundary condition, it is found that with the assistance of gas, the pressure drop and first normal stress difference etc have great differences. Moreover, experiments verify that the influence of gas pressure on melt extrusion is great. Simulation and experimental results demonstrate that the first normal stress difference of melt induced by gas assistance is the main reason for change of melt velocities, pressure drop and forming etc, but these results can not be represented by GAE simulation based on full slip boundary condition. Therefore, the influence of gas on melt extrusion should be considered during numerical simulation of GAE, and the process parameters, for example, gas pressure should be reasonably set in the practical application of GAE.

    参考文献
    相似文献
    引证文献
引用本文

任重, 黄兴元, 柳和生, 邓小珍.基于气液两相流的聚合物气辅挤出数值模拟[J].高分子材料科学与工程,2016,32(3):102-107. Zhong Ren, Xingyuan Huang, Hesheng Liu, Xiaozhen Deng. Numerical Simulation of Polymer Gas-Assisted Extrusion Based on Gas/Liquid Two-Phase Flow[J]. Polymer Materials Science & Engineering,2016,32(3):102-107.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司