橡胶轮胎部件挤出过程数值模拟分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

2015基本科研川大-泸州(2082604184274)


Numerical Simulation Analysis of the Extrusion of Tire Rubber Part
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以某轮胎部件胶料的挤出过程为研究对象,采用Phan-Thien-Tanner (PTT)本构方程对挤出过程进行三维等温数值模拟。分析了胶料在挤出机内的流动情况,并考察分析壁面滑移系数、流量和牵引速率对出口速率分布和挤出胀大的影响。结果表明,在自由挤出的条件下,壁面滑移程度对胶料离开口模时的速率分布影响较大,主要表现为对挤出胀大的影响,而流量的变化对挤出胀大的影响较小;当施加牵引时,随着牵引速率的增加,挤出胀大比减小,当牵引速率超过一定范围后会导致挤出物的形状发生畸变。

    Abstract:

    Taking the extrusion process of tire rubber part as study object, the three-dimensional isothermal numerical simulation of the extrusion process was conducted by using Phan-Thien-Tanner constitutional equation. The 3-D flow situation of the rubber compound in the extruder was studied. In addition, the influence of wall slip coefficient, flow rate and drawing rate on the shape of extrudate and the velocity distribution at the end cross section of the die were investigated. The simulation results show that, under free extrusion conditions, the wall slip coefficient has a significant effect on the velocity field and the shape of the exits, while the flow rate has relatively little impacts on it. Under the traction conditions, the swell ratio reduces with an increasing drawing speed within a certain range, and the extrudate is serious deformed when the drawing speed is out of the range.

    参考文献
    相似文献
    引证文献
引用本文

李永超, 高雪芹, 杨其, 邓聪, 张国翔, 王海, 胡湘琦.橡胶轮胎部件挤出过程数值模拟分析[J].高分子材料科学与工程,2016,32(3):108-112. Yongchao Li, Xueqin Gao, Qi Yang, Cong Deng, Guoxiang Zhang, Hai Wang, Xiangqi Hu. Numerical Simulation Analysis of the Extrusion of Tire Rubber Part[J]. Polymer Materials Science & Engineering,2016,32(3):108-112.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司