静电纺丝制备聚苯乙烯/纳米纤维素晶体纳米复合薄膜及其性能表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家林业局引进国际先进林业科学技术项目(2013-4-11);国家自然科学基金资助项目(31470580);中央高校建设高水平大学博士研究生基金项目(2572014AB14)


Fabrication and Characterization of Electrospun Polystyrene/Cellulose Nanocrystals Nanofibrous Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用静电纺丝法成功制备出聚苯乙烯(PS)/纳米纤维素晶体(CNCs)纳米复合薄膜,并对复合纤维薄膜的形貌、热学性能、力学性能和疏水性能进行了表征。结果表明,随CNCs添加量的增加,静电纺PS/CNCs纳米复合纤维表面逐渐光滑,且纤维平均直径呈先增大后减小趋势;纳米复合薄膜呈两阶段热分解方式,其最大热解温度由415.2 ℃升高到421.4 ℃;纳米复合薄膜的拉伸性能也随CNCs的增加而有所提高,CNCs添加量为m(CNCs)/m(PS)=7/100时得到纳米复合薄膜的最大拉伸应力为(0.4±0.02) MPa,为电纺PS纳米纤维薄膜拉伸应力的5.7倍,而断裂伸长率则呈逐渐减小趋势。亲水性CNCs的加入,并未降低PS本身疏水特性,其接触角先增大至139°后减小到130°,接触角总体呈增大趋势。

    Abstract:

    An electrospinning process was successfully utilized to fabricate polystyrene/cellulose nanocrystals (PS/CNCs) nanofibrous mats. Morphology, thermal property, and mechanical performance as well as hydrophobicity of the obtained nanofibrous mats were characterized. The results show that fiber surface of PS/CNCs fibrous mats gradually turns smooth with increasing the CNCs content, and the fiber diameter increases first and then decreases. The electrospun PS/CNCs mats exhibit two-stage thermal decomposition process. The maximum thermal decomposition temperature is increased from 415.2 ℃ to 421.4 ℃ as the CNCs content increases from m(CNCs)/m(PS)=5/100 to 7/100. Tensile test indicates that the incorporation of CNCs could improve the tensile strength of electrospun mats and the maximum tensile stress is (0.4±0.02) MPa at m(CNCs)/m(PS)=7/100 CNCs loading (almost 5.7-fold compared with the electrospun PS mat). However, the elongation at break has a downward trend with CNCs incorporated. When adding hydrophilic CNCs, the hydrophobic property of electrospun PS is not affected and the contact angle of electrospun PS/CNCs nanofibrous mats is increased to 139°.

    参考文献
    相似文献
    引证文献
引用本文

宦思琪, 程万里, 白龙, 刘国相, 韩广萍.静电纺丝制备聚苯乙烯/纳米纤维素晶体纳米复合薄膜及其性能表征[J].高分子材料科学与工程,2016,32(3):141-146. Siqi Huan, Wanli Cheng, Long Bai, Guoxiang Liu, Guangping Han. Fabrication and Characterization of Electrospun Polystyrene/Cellulose Nanocrystals Nanofibrous Films[J]. Polymer Materials Science & Engineering,2016,32(3):141-146.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司