表面改性蒙脱土/聚氨酯形状记忆复合材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51063007)


Preparation and Properties of Surface Modified Montmorillonite/Polyurethane Shape Memory Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过表面引发原子转移自由基聚合(SI-ATRP)的方法在蒙脱土表面接枝聚甲基丙烯酸甲酯(PMMA),接枝改性后的蒙脱土与聚氨酯原位聚合制备形状记忆聚氨酯复合材料。采用傅里叶变换红外光谱、X射线衍射、扫描电镜、热重分析、动态力学分析等方法表征材料的结构与性能,并测试其形状记忆性能。结果表明,随着改性蒙脱土含量的增大,复合材料的拉伸强度逐渐增大、玻璃化转变温度(Tg)上升,且改性蒙脱土的加入增大了复合材料的热稳定性,复合材料在循环4次后仍具有很好的形状记忆性能。

    Abstract:

    Poly(methyl methacrylate)-functionalized montmorillonite (MMT-g-PMMA) was synthesized via surface-initiated atom transfer radical polymerization(SI-ATRP). The modified montmorillonite was combined with polyurethane (SMPU/MMT-g-PMMA) to obtain shape memory composites. The structure character and performance were characterized by FT-IR, XRD, SEM, TGA and DMA. The shape memory property was also tested. The results indicate that the tensile strength and Tg of composites increase gradually with the increasing content of modified montmorillonite. Owing to the modified MMT, the thermal stability of the composites is improved. Furthermore, the composites also employ good shape memory properties after four times cycles.

    参考文献
    相似文献
    引证文献
引用本文

姜雪, 武荣兰, 张玉芬, 吴爱宗, 王吉德.表面改性蒙脱土/聚氨酯形状记忆复合材料的制备与性能[J].高分子材料科学与工程,2016,32(3):152-156. Xue Jiang, Ronglan Wu, Yufen Zhang, Aizong Wu, Jide Wang. Preparation and Properties of Surface Modified Montmorillonite/Polyurethane Shape Memory Composites[J]. Polymer Materials Science & Engineering,2016,32(3):152-156.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司