剑麻纤维素纳米晶须/POSS杂化材料的制备及热性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21264005,21204013);广西自然科学基金资助项目(2012GXNSFBA053153,2013GXNSFDA019008)


Fabrication and Thermal Property of Sisal Cellulose Nanowhiskers/POSS Hybrids
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过硫酸水解法制备剑麻纤维素纳米晶须(SCNW),通过KH550直接水解缩合法制备八氨基低聚倍半硅氧烷(POSS-NH2),并以环氧氯丙烷作为交联剂制备POSS接枝剑麻纤维素纳米晶须的杂化材料。采用红外光谱仪、扫描探针显微镜、热重分析仪对其表面形貌和热性能进行了表征。测试结果表明POSS成功地接枝到SCNW的表面, 并且SCNW接枝POSS后,其热性能有了较大的提高,初始失重温度从145 ℃提高到256 ℃,共提高了111 ℃,700 ℃时的残炭率也高达40%。

    Abstract:

    In this study, sisal cellulose nanowhiskers (SCNW) and POSS-NH2 nanoparticles were first respectively prepared by sulfuric acid hydrolysis and hydrolytic condensation of KH550, respectively. Then SCNW/polyhydral olgomeric silsequioxane (POSS) hybrids were built through a simple cross-linking process with epichlorohydrin as crosslinking agent. The chemical structure, morphology and thermal property of hybrids were characterized by FT-IR , AFM and TG analysis. The results present that POSS-NH2 nanoparticles are successfully grafted onto the surface of SCNW. The thermal property of hybrids is improved. The initial decomposition temperature of the hybrids is 256 ℃, higher than 145 ℃ of SCNW. The residual mass of hybrids is 40% at 700 ℃.

    参考文献
    相似文献
    引证文献
引用本文

刘红霞, 耿思敏, 王世其, 王林冲, 韦春, 吕建.剑麻纤维素纳米晶须/POSS杂化材料的制备及热性能[J].高分子材料科学与工程,2016,32(3):162-166. Hongxia Liu, Simin Geng, Shiqi Wang, Linchong Wang, Chun Wei, Jian Lü. Fabrication and Thermal Property of Sisal Cellulose Nanowhiskers/POSS Hybrids[J]. Polymer Materials Science & Engineering,2016,32(3):162-166.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司