低相对分子质量线型和星形聚乳酸及其共聚物多元醇的合成、结构与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21404112);宁波市重点科技项目(2014B10023)


Synthesis and Characterization of Linear and Star-Shaped Polylactide and Poly(Lactide-co-Caprolactone) Polyols with Low Molecular Weight
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用丙交酯在小分子多元醇链转移剂和辛酸亚锡催化剂的作用下开环聚合或与己内酯共聚,合成了一系列线型和星形聚乳酸和聚(乳酸-co-己内酯)多元醇。获得的聚乳酸和聚(乳酸-co-己内酯)实际相对分子质量接近于理论相对分子质量,且相对分子质量分布较窄。聚合过程研究表明,在多元醇链转移剂下丙交酯开环聚合反应较快,其转化率在10 min内达到95%以上,且之后聚乳酸多元醇相对分子质量基本不变。通过差示扫描量热法、热重分析研究了聚乳酸和聚(乳酸-co-己内酯)多元醇的热性能。聚乳酸多元醇的玻璃化转变温度(Tg)随着相对分子质量的增大而升高;己内酯的引入可以有效地降低聚乳酸多元醇的Tg,且提高了聚乳酸多元醇热稳定性。

    Abstract:

    Various of polylactide (PLA) and poly(lactide-co-caprolactone) (P(LA-co-CL)) polyols with different structures and molecular weight were synthesized by polymerization of lactide or/and caprolactone in the present of different chain transferring agents using SnOct22 as catalyst. The structure and molecular weight(Mn) of the resulted polyols were characterized by FT-IR, 1H-NMR and GPC. The Mn of PLA and P(LA-co-CL) polyols is very close to theoretical values and in a narrow distribution. Moreover, the polymerization rate of lactide is very fast in the present of chain transferring agents at 160 ℃, and the conversion of lactide is above 95% after 10 min and after that the Mn of PLA polyols keeps unchanged. The thermal properties of the resulted PLA and P(LA-co-CL) polyols were investigated by DSC and TGA. The glass transition temperature (Tg) of PLA polyols increases with increasing Mn; the introduction of caprolactone can decrease Tg effectively and enhance the thermal stability of PLA polyols.

    参考文献
    相似文献
    引证文献
引用本文

石朔, 顾林, 杨义浒, 余海斌.低相对分子质量线型和星形聚乳酸及其共聚物多元醇的合成、结构与性能[J].高分子材料科学与工程,2016,32(4):1-6. Shuo Shi, Lin Gu, Yihu Yang, Haibin Yu. Synthesis and Characterization of Linear and Star-Shaped Polylactide and Poly(Lactide-co-Caprolactone) Polyols with Low Molecular Weight[J]. Polymer Materials Science & Engineering,2016,32(4):1-6.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-04-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司