蓖麻油基UV固化聚氨酯丙烯酸酯的合成及固化膜性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省自然科学基金资助项目(2015A030313207);广东省科技计划项目(2015A010105004,2015A010105023,2013B080200004,2013B090600004)


Synthesis of Castor Oil-Based UV-Curable PUA and Properties of the Cured Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以异氟尔酮二异氰酸酯、二苯基甲烷二异氰酸酯、聚乙二醇(PEG)、聚己二酸丁二醇、蓖麻油(CO)、二羟甲基丙烯酸(DMPA)、双酚A和丙烯酸羟乙酯为原料合成了一系列蓖麻油基UV固化聚氨酯丙烯酸酯(PUA),通过配方优化获得了综合性能良好、高绝缘性、高附着力的绝缘油墨用PUA树脂。通过红外光谱、热重分析、导电和接触角测定等对树脂及固化膜性能进行了表征。结果表明,-NCO基团处的特征吸收峰的消失,氨基甲酸酯键及C=C特征峰的出现表明了整个反应体系是朝着实验设计的方向进行的;随着CO/PEG摩尔比的增加,PUA低聚物的耐热性提高,导电性能减弱。同时探讨了CO/PEG摩尔比,CO/聚己二酸丁二醇酯二醇(PBA)摩尔比和DMPA含量等对涂膜性能的影响,结果表明,CO/PEG摩尔比为1/6,CO/PBA摩尔比为1/3,PBA/PEG为1/2,DMPA的质量为所有组分总质量的1.5%时,光固化后的涂膜综合性能优异。

    Abstract:

    A series of propionic acid(DMPA) modified UV curing polyurethane acrylate(PUA) resins based on the different mole ratios of castor oil(CO)/polyethylene glycol (PEG), poly butylene adipate(PBA) and polyester diol, isophorone diisocyanate(IPDI) and diphenyl-methane-diisocyanate(MDI), DMPA, bisphenol A (BPA) and 2-hydroxyethyl acrylate(HEA) were prepared with organic bismuth catalyst MB20. High insulation, high adhesion, and good comprehensive properties of polyurethane acrylate resin were obtained. The properties of the resin were characterized by an infrared spectrometer, thermogravimetric analyzer and contact angle meter, and the effects of the mole ratio of CO/PEG, the mole ratio of CO/PBA and the content of DMPA on the properties of coating were discussed in detail. The results show that the coating performance is excellent when the mole ratio of CO/PEG is 1/6, the mole ratio of CO/PBA is 1/3, the mole ratio of PBA/PEG is 1/2, the DMPA dosage is 1.5%.

    参考文献
    相似文献
    引证文献
引用本文

黄家健, 周闯, 周健, 杨卓鸿, 袁腾.蓖麻油基UV固化聚氨酯丙烯酸酯的合成及固化膜性能[J].高分子材料科学与工程,2016,32(4):23-29. Jiajian Huang, Chuang Zhou, Jian Zhou, Zhuohong Yang, Teng Yuan. Synthesis of Castor Oil-Based UV-Curable PUA and Properties of the Cured Film[J]. Polymer Materials Science & Engineering,2016,32(4):23-29.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-04-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司