发光二极管封装用环氧树脂的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏高校优势学科建设工程资助项目


Preparation and Performance of Epoxy Resin for Light-Emitting Diode Encapsulation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以1,1,1三(4羟基苯基)乙烷(THPE)和环氧氯丙烷(ECH)为原料,合成具有较高折光率的三官能度环氧预聚物(TEP),其折光率为1.6002;由邻二氯苄和硫脲合成了既有芳香环又含硫的固化剂1,2-苯二甲硫醇(OBDMT),通过核磁共振对两者结构进行了表征。用OBDMT、常用含硫固化剂多硫醇(PCA)和传统固化剂甲基六氢苯酐(MHHPA)分别固化TEP成为3种固化体系。对3种固化体系进行了光学性能、耐热性能和力学性能的测试。结果表明,在环氧树脂中同时引入硫元素和苯环可以有效提高其折光率,TEP/OBDMT固化物折光率高达1.6420,具有较高的透光率(90%),很强的紫外光吸收能力,优异的热稳定性(玻璃化转变温度Tg=160 ℃,热分解温度=260 ℃)和良好的力学性能,可以应用于发光二极管(LED)封装领域。

    Abstract:

    The trifunctional epoxy resin (TEP) was synthesized using tri(4-hydroxyphenyl)ethane and epichlorohydrin as materials. The refractive indice of TEP was 1.6002. 1,2-Benzenebis(methanethiol) (OBDMT) was synthesized with 1,2-bis(chloromethyl)-benzene and thiocarbamide. The OBDMT is an aliphatic thiols curing agent and it has an benzene group. The molecular structure of TEP and OBDMT was characterized by 1H-NMR. The OBDMT and common polythiol curing agent(PCA),the traditional curing agent methylhexahydrophthalic anhydride(MHHPA) were used to cure TEP. Then the optical properties, heat resistance and mechanical properties were analyzed. The results show that the sulfur atoms and benzene groups in epoxy resin contribute to the obvious increasing of their refractive indices. The refractive indice of TEP/OBDMT cured resin is up to 1.6420, and the cured resin not only has good light transmittance(90%) and the ability to absorb ultraviolet light, but also has excellent thermal stability (Tg of 160 ℃,thermal decomposition temperature of 285 ℃) and mechanical properties, which indicate TEP/OBDMT cured resin can be applied to light-emitting diode (LED) packaging field.

    参考文献
    相似文献
    引证文献
引用本文

陈旭旺, 蔺向阳, 朱海洋.发光二极管封装用环氧树脂的制备与性能[J].高分子材料科学与工程,2016,32(4):30-35. Xuwang Chen, Xiangyang Lin, Haiyang Zhu. Preparation and Performance of Epoxy Resin for Light-Emitting Diode Encapsulation[J]. Polymer Materials Science & Engineering,2016,32(4):30-35.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-04-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司