热致性液晶聚芳酯的相对分子质量控制与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金资助项目(51403133);四川大学博士后专项基金


Control of the Relative Molecular Weight of Thermotropic Liquid Crystalline Polyarylate and Its Properties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用对苯二甲酸(TPA)作为相对分子质量调节剂,将6-乙酰氧基-2-萘甲酸和对乙酰氧基苯甲酸通过熔融酯交换和固相缩聚两步法,合成了数均相对分子质量约为5619~12264 的热致液晶聚芳酯(PAT)。采用傅里叶变换红外光谱、核磁共振波谱仪、偏光显微镜、热失重分析和差示扫描量热分析等手段对单体和聚合物进行了结构与性能表征。结果表明,所制备的聚合物结构与实验设计相符,其热稳定性随着聚合物相对分子质量的增加而提高,在高温下保持向列型液晶相,因此在高温下可以与其他聚合物复合加工。当聚合物发生固相缩聚以后,聚合物的相对分子质量变大,结晶性能变好,热稳定性也明显提高。

    Abstract:

    In this paper, with terephthalic acid (TPA)as molecular weight regulator, a kind of thermotropic liquid crystalline (TLCP) polyarylate (PAT), number average molecular weight of which ranged from 5619 to 12264, was synthesized from p-acetoxy benzoic acid (ABA) and 6-acetoxy-2-naphthoic acid (ANA) by melt phase polycondensation and solid phase polycondensation. Its structure, thermal stability and liquid crystalline behavior were investigated by FT-IR, NMR, polarizing microscope (POM), TGA. The results show that the structure of the PATs matches with that designed. The PATs keep nematic liquid crystal at high temperature and its thermal stability is improved with the increase of molecular weight, which means that this TLCP can match the process window of some polymers at high temperature. After solid phase polycondensation, its relative molecular weight increases, crystallization properties and its thermal stability become better.

    参考文献
    相似文献
    引证文献
引用本文

吴磊, 李若松, 叶光斗, 徐建军, 刘鹏清.热致性液晶聚芳酯的相对分子质量控制与性能[J].高分子材料科学与工程,2016,32(4):51-57. Lei Wu, Ruosong Li, Guangdou Ye, Jianjun Xu, Pengqing Liu. Control of the Relative Molecular Weight of Thermotropic Liquid Crystalline Polyarylate and Its Properties[J]. Polymer Materials Science & Engineering,2016,32(4):51-57.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-04-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司