辐照接枝法制备增韧剂对聚丙烯结构与性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

绿色轻工湖北省重点实验室开放基金资助项目(2013-K-面上)


Effects of Toughening Agent Prepared via Irradiation Graft Method on Structure and Properties of Polypropylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于乙烯-辛烯共聚物(POE)辛烯长支链的可反应性,采用γ射线辐照等规聚丙烯(iPP)/POE/线型低密度聚乙烯(LLDPE)共混体系,得到聚丙烯增韧剂抗冲击聚丙烯基接枝共聚物(IPGC)。力学性能测试结果表明,辐照剂量为50 kGy时所得IPGC的增韧效果最好,iPP的冲击强度随IPGC含量的增加而提升;连续自成核退火热分级(SSA)结果表明IPGC中POE与iPP和LLDPE均发生接枝;扫描电镜观察结果显示IPGC以“海岛”结构,粒径3~5 μm均匀分散在聚丙烯基体中,辐照产生接枝物在iPP/IPGC共混体系中起到了界面增容作用;X射线衍射和偏光显微镜结果表明分散相IPGC对iPP起到异相成核作用,促进了iPP的结晶,降低了晶粒平均尺寸,细化了iPP晶粒,从而提升了iPP的力学性能。

    Abstract:

    Based on the reactivity of ethylene-octene copolymer (POE) and its long octene branch-chains, γ-ray irradiation was applied to polypropylene (iPP)/POE/linear low-density polyethylene (LLDPE) blend system to obtain iPP toughening agent, impact polypropylene-based graft copolymer (IPGC). Mechanical tests show that IPGC has the best toughening effect at the irradiation dose of 50 kGy and the impact strength of iPP is increased with IPGC content. Successive self-nucleation and annealing (SSA) results show that both iPP and LLDPE are grafted onto POE chains. SEM micrographs show that IPGC has a “core-shell” structure and is dispersed in iPP matrix as “sea-island” structure with a scatter size of 3~5 μm, the graft copolymer in IPGC enhances the interfacial interaction of rubber (POE) phase and resin phase (LLDPE and iPP). According to WAXD and POM results, the heterogeneous nucleation of IPGC decreases the average size of iPP crystal and refines the crystal grains, as a result, the mechanical properties of iPP are improved.

    参考文献
    相似文献
    引证文献
引用本文

邵禹通, 程思怡, 周峰, 张月航, 吕奇, 严海彪.辐照接枝法制备增韧剂对聚丙烯结构与性能的影响[J].高分子材料科学与工程,2016,32(4):58-62. Yutong Shao, Siyi Cheng, Feng Zhou, Yuehang Zhang, Qi Lü, Haibiao Yan. Effects of Toughening Agent Prepared via Irradiation Graft Method on Structure and Properties of Polypropylene[J]. Polymer Materials Science & Engineering,2016,32(4):58-62.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-04-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司