气相法白炭黑填充天然橡胶的裂纹扩展机理
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21274070);宁波市"3315计划"高端创业创新团队(A类)(2012S0001);宁波大学研究生科研创新基金;浙江省科技创新团队子项目(019-E01176124200)


Crack Growth Mechanism of Fumed Silica Filled Natural Rubber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了不同粒径,不同份数的白炭黑对天然橡胶(NR)裂纹生长行为的影响。采用具有裂纹生长测试功能的DMA(DMA-Crack Growth)对预割口试样的裂纹扩展速度进行测试。利用超高速显微摄像技术对裂纹扩展尖端进行在线追踪,得到裂纹扩展尖端的动态显微图像。结果表明,添加20 phr原生粒径为15 nm的气相法白炭黑时,裂纹尖端韧带均匀且细密,对裂纹生长起到很好的阻碍作用;添加20 phr原生粒径为7 nm的气相法白炭黑时,对试样的裂纹生长有不利影响。

    Abstract:

    The rubber crack growth behaviors of natural rubber (NR) influenced by silica particles with different sizes and contents were studied. A special dynamic mechanical analyzer (DMA) of crack growth test function was used to measure the crack growth rates. The crack tip was photographed by an ultra-high speed camera. The results show that the ligaments at the crack tip are uniformly and closely distributed, when 20 phr silica with the primary particle size of 15 nm is embedded in the NR matrix, the crack growth behavior is hindered obviously. However, when adding 20 phr silica with the primary particle size of 7 nm, crack growth rate is adversely affected.

    参考文献
    相似文献
    引证文献
引用本文

付坤, 翁更生, 闫智敬, 陈忠仁, 尹启彦, 朱敏琪.气相法白炭黑填充天然橡胶的裂纹扩展机理[J].高分子材料科学与工程,2016,32(4):90-95. Kun Fu, Gengsheng Weng, Zhijing Yan, Zhongren Chen, Qiyan Yin, Minqi Zhu. Crack Growth Mechanism of Fumed Silica Filled Natural Rubber[J]. Polymer Materials Science & Engineering,2016,32(4):90-95.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-04-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司